< >

Standard cylinder SCLB Series

1, hard oxidation cylinder: the surface of the cylinder is oxidized, so that the hardness of the cylinder is enhanced, not easy to deformation, wear-resistant and durable
2, die-casting thickened aluminum end cover: stamping thickened aluminum alloy end cover, real material hardness, not easy to crack, compressive durability
3, imported seals: imported seals, wear resistance and oxidation resistance

Contact Now E-Mail Telephone WhatsApp

Product Details

Standard cylinder SCLB Series Use and maintenance of locking cylinders

1. In the locking state, if the pressure supply of the air port A is carried out under the non-pressurized state of the air port on both sides, there is a big danger that the lock is not lifted, or the lock is suddenly lifted, and the piston rod will fly out. When releasing the locking mechanism, be sure to provide pressure to the air port B, and release the locking mechanism without load.
2, if the use of rapid exhaust valve to speed up the falling speed, sometimes the cylinder body than the lock pin to start action, and can not be lifted normally. Therefore, do not use quick exhaust valves on locked cylinders
3, please do not use three (especially in the sealing type metal seal) solenoid valve for combination use. If there is pressure inside the air port on the side of the locking mechanism, the locking will not work. In addition, sometimes even if it is temporarily locked, the air leaking from the solenoid valve will enter the cylinder, and the lock will be lifted after a period of time.
4. If the locking mechanism side is subjected to back pressure, sometimes the lock will be lifted, so please use a single or integrated individual exhaust solenoid valve
5, in the case of the cylinder with adjustable buffer, if the gas buffer valve needle on the side of the locking mechanism is too much, the piston will sometimes produce constraints at the end of the stroke, resulting in the damage of the locking mechanism, so the needle valve should be adjusted so that the piston will not produce constraints.
6, when the manual operation of the locking mechanism is completed, be sure to reset the manual device to the original position. In addition, please do not perform manual operation outside the time of adjustment, otherwise it will be more dangerous.
7. Please release the lock when installing and adjusting the cylinder: in the locked state

Standard cylinder——SCLB Series parameter specification

brand	BAIDI	model	SCLB Lock cylinder
lubrication	do without	manner of execution	manner of execution
Working environment and temperature	-20°-70°	speed	50-500m/S
Internal magnetic ring	magnetic	the pressure range of use	0.12-1.0MPa

Standard cylinder——SAlSeries External specification

cylinder bore \symbol	A	AB	AC	AD	AE	B	C	CB	D		DA		E	EA	F	FA	H
40	144.5	49	95.5	30	27.5	50	74	2.5	16		34		M12×1.25	24	17	7	13
50	152.5	57	95.5	30	27.5	62	86	2.5	20		42		M16×1.5	32	23	8	17
63	157	57	100	31.5	27.5	75	99	2.5	20		42		M16×1.5	32	23	8	17
80	188	75	113	39	33	94	120.5	13	25		54		M20×1.5	40	26	10	22
100	194	75	119	39	33	112	138.5	13	25		54		M20×1.5	40	26	10	22

cylinder bore \symbol	K		KA	KB	M	MA	P	PA		PB		PC
40	M6×1.0		14.5	37	32	15	PT1/4	17.5		6
50	M⁶ ×1.0		14.5	47	38	15	PT1/4	17.5		8.5		17
63	M8×1.25		14.5	56	38	15	PT3/8	18		9.5		15
80	M10×1.5		17	70	47	21	PT3/8	25.5		10		19.5
100	M10×1.5		17	84	47	21	PT1/2	22.5		7		16.5