TN dual-axis double-rod cylinder small pneumatic 10/16/20/25/32/40x10

TR two-shaft cylinder installation and use

1. When the load changes during the work, the cylinder with sufficient output force should be selected.

2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected.

3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take appropriate protective measures.

4. Before the cylinder is connected to the pipeline, the stolen goods in the pipeline must be removed to prevent debris from entering the cylinder.

5. The medium used by the cylinder should be filtered by a filter element above 40Um before it can be used.

6. Because the front cover and piston of the cylinder are short, the general stroke cannot be selected too large.

7. In low temperature environment, anti-freezing measures should be taken to prevent the water in the system from freezing.

8. The cylinder should be avoided by side load as much as possible during the working process to maintain the normal operation and service life of the cylinder.

9. If the cylinder is not used for a long time, pay attention to the surface rust prevention, and the inlet and exhaust port should be equipped with dustproof plugging caps. Due to the high accuracy of product production and guidance, please do not disassemble the cylinder fixing block or cylinder head by yourself.