SC series vacuum valve cylinder

1. When the load changes during work, a cylinder with sufficient output force should be selected;

2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;

3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take necessary protective measures;

4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;

5. The medium used in the cylinder should be filtered by a filter element of more than 40μm before it can be used;

6. In the low temperature environment, anti-freezing measures should be taken to prevent the moisture in the system from freezing;

7. The cylinder should be tested for no-load operation before use, and the buffer should be adjusted to the minimum before operation, and gradually relaxed, so as to avoid excessive impact and damage to the cylinder;

8. Avoid side load, otherwise the piston rod will be bent and deformed and damage the rod end thread. The single-action type cannot be loaded when returning to the city;

9. If the cylinder is removed and not used for a long time, it is necessary to pay attention to the rust-proof surface, and the intake and exhaust ports should be added with dust-proof blocking caps, especially note: the front, rear and cover cannot be disassembled by themselves.

company profile

advanced equipment

The company has developed automated production lines composed of advanced equipment such as robots imported from Japan and high-precision CNC machining centers, basically realizing unmanned production; The intelligent production system and waterless testing system are developed to optimize the production process, improve the production efficiency and ensure the quality of product testing.

Enterprise honor 

• Factory

type of shipping