Português
Русский
Español
Francés
ไทย
Bahasa Indonesia
Việt
Türk
Melayu
العربية
1.TN two-shaft cylinder double piston double force, has a certain anti-bending and anti-torsion performance, can withstand a certain side load, is one of the most widely used two-shaft cylinder.2. There are mounting holes on three sides of the two-shaft cylinder fixing plate, which is convenient for multi-position loading.3. When the load changes during the work, the cylinder with sufficient output force should be selected.4. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected.5.
Contact Now
1. Multi-position loading: The fixed plate design has three mounting holes, which allows the cylinder to be loaded in multiple positions, improving its applicability.2. Front end anti-collision pad: The anti-collision pad at the front end of the cylinder body can adjust the stroke and alleviate the impact, protecting the cylinder from damage.3. With magnetic type standard configuration: the standard configuration of this series of cylinders is with magnetic type, which helps to use in occasions where magnetic induction is required.
Contact Now
product detail：TN series twin-shaft cylinder，It is characterized by the use of plastic polyurethane material, which meets the environmental requirements of ROHS. With high elasticity, its small bending radius allows PU tubes to pass through tight Spaces. In addition, the cylinder also has the characteristics of anti-knotting, which has better anti-knotting effect than other plastic pipes. At the same time, it also has excellent plasticity, can withstand repeated expansion and contraction, and anti-wear characteristics, so that it can be used for a long time in a wear-prone environment.1.
Contact Now
1. There are mounting holes on three sides of the fixing plate, which is easy to load in multiple positions.2. It has certain resistance to bending and torsion, and can withstand certain lateral load.3. In addition to the axis of the body, the other faces are equipped with mounting holes, providing customers with a variety of installation and fixing methods.4. There are two groups of inlet on both sides of the cylinder, and the exhaust port is selected for actual needs.
Contact Now
Product selection guide: When selecting a dual-shaft cylinder, factors that need to be considered include load capacity, accuracy requirements, installation space and use environment.
Contact Now
Product characteristicsThe MGPM series three-axis cylinder is a kind of automation element with superior performance and compact design. This type of cylinder is widely used in many fields, from its construction to performance characteristics, showing its efficiency and reliability. The following will explore in depth the multiple aspects of the MGP series three-axis cylinder:1.
Contact Now
BSC series holding cylinder product detailsThe BSC series of holding cylinders is a product of the BESTEN brand, which is derived from the combination of standard cylinders and locking devices. A notable feature of this cylinder is that it can be locked to stop at any position in the stroke.
Contact Now
HRQ series ROtary table cylinder product details6. Two modes of buffer could be chosen,adjustment bolt buffer and internalshock absorber,the maximum buffer energy of internal shock absorber is 3-5 times that of adjustment boltbuffer.HRQ series ROtary table cylinder interior structure NO.ItemMateria1Adjustment boltCarbon steel2Hexagon nutCarbon steel3Seal washerCarbon steel &Rubber4Front coverAluminum alloy5BodyAluminum alloy6Hexagon socket head cap boltCarbon steel7TableAluminum alloy8Hexagon socket head cap boltCarbon steel9Guide pin/flat keyCarbon steel10Deep-g
Contact Now
TR two-shaft cylinder installation and use1. When the load changes during the work, the cylinder with sufficient output force should be selected.2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected.3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take appropriate protective measures.4. Before the cylinder is connected to the pipeline, the stolen goods in the pipeline must be removed to prevent debris from entering the cylinder.5.
Contact Now
MPE Series Threaded Cylinder product detailsThe MPE series of threaded cylinders are compact, small and lightweight, thus saving space. The design is flexible and can be integrated with multiple cylinders without the need to install accessories, making the installation process easier.
Contact Now
HLS Series slide table cylinder product details1. With magnetic switch slots:There are magnetic switch slots side of the cylinder body convenient to installinducting switch.2. Two models (HLS/HLSL)are available3. Six bore size are available:Bore size:6,8,12,16,20,25HLS Series slide table cylinder (cross roll type) interior structure ItemMaterialItemMaterial1Floating jointCarbon stee13Magnet holderBrass2BumperTPU14Magnet washerNBR3ScrewCarbon steel15MagnetSintered metal(Neodymium-iron-boron)4ScrewCarbon steel5Fixing plateAluminum alloy16Piston sealN
Contact Now
1. Magnetic characteristics: This series of cylinders are all attached with magnets, which is convenient to use with magnetic switches and other sensors to achieve better control effects. 2. Product specifications: For example, MA16×200SCA model cylinder, cylinder diameter of 16mm, stroke of 200mm, is a common specification.3. Purchase information: Products can be purchased through this official website, providing detailed product pictures, prices, parameters, specifications and other information for customer reference.
Contact Now
1. High-strength material: The cylinder is made of high-precision stainless steel pipe, which is not only of high strength, but also has good corrosion resistance, suitable for use under various environmental conditions.2. Standardized products: MA series mini cylinders provide a variety of specifications, including different cylinder diameters and stroke lengths, as well as the corresponding installation accessories, so that customers can choose the right products according to their specific needs.3.
Contact Now
CDU Series multi-seat cylinder product details1. Use high temperature resistant sealing material,The operating temperature ranges from 0 to 150°C. (Option).2. There are six apertures available: apertures: 6,10,16,20,25,323.6 direction installation: the cylinder can be installed from 6 directions, easy to install and use: front, rear, left, right, bottom installation, top4. There are magnetic switch slots around the cylinder block: there are magnetic switch slots around the cylinder block to facilitate the installation of induction switches.5.
Contact Now
MG series mini cylinder product details1.Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.2.The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.3.There are cylinders and mounting accessories with several specifications for your choice.MG series mini cylinder interior structure NO.ItemMaterial1Rod nutCarbon steel2Front cover packingNBR3BushingWear resistant material4BumperTPU5Piston sealNBR6Wear ringWear resistant material7MagnetRubber8Ba
Contact Now
TCL Series Tri-rod cylinder product detailsTCL series three-rod cylinder is a three-axis cylinder that implements JIS standards. It is made of two guide rods made of special bearing steel, equipped with linear bearing or bronze bearing guide, and has high torsion resistance and lateral load resistance. This design makes the cylinder suitable for use in situations where push action is required, or where high precision and load capacity are required.In addition, the working medium of the TCL/TCM series cylinder is air, which needs to be filtered by a 40 micron filter.
Contact Now
Standard cylinder SAU Series product details1.Mounting accessories are the same as SC series.2.The seal material with high temperature resistance is adopted to guarantee the normaloperation of cylinder at 150°℃.Standard cylinder——SAU Series Inner structure NO.ltemMaterial 1Rod nutCarbon steel 2Piston rodCarbon steel with 20μm chrome plated 3Front cover packingTPU 4BushingWear resistant material 5Front coverAluminum alloy 6Cushing O-ringNBR 7Cushion gasketTPU 8BarreAluminum alloy 9PistonAluminum alloy 10Piston ro
Contact Now
Accessories Silencers PAL series Product detailsAn aluminum foam muffler comprises an outer cylinder, an intake pipe with exhaust holes, an exhaust pipe and a front and rear end cover. An aluminum foam disk with a through hole is arranged parallel between the outer cylinder, the intake pipe and the rear end cover to separate the space into a plurality of chambers. Each aluminum foam disk is provided with a round large hole and its periphery is closely connected with the inner wall of the outer cylinder.
Contact Now
product details1.Mounting accessories are the same as SC series.2.The seal material with high temperature resistance is adopted to guarantee the normaloperation of cylinder at 150°℃.Standard cylinder——SAI Series Inner structure NO.ltemMaterial 1Rod nutCarbon steel\Stainless steel 2Piston rodCarbon steel with 20μm chrome platedor Stainless steel 3Front cover packingTPU 4Front coverAluminum alloy 5BushingWear resistant material 6Cushing O-ringTPU 7BarrelAluminum alloy 8O-ringNBR 9PistonAluminum alloy 10Piston SealNBR 11
Contact Now
CXSM series Twin-rod cylinder product detailsThe CXSM two-shaft cylinder is compact and flexible in design, and the cylinder diameter is available in a variety of specifications, so it can meet the needs of different applications. In addition, it features high non-rotating accuracy, dual port position, standard magnetic induction and buffer buffering. The thread of CXSM two-axis cylinder is washed, smooth and smooth, and the inner hole is processed by special processing technology. The friction resistance is low, and the starting pressure is low, which can extend the service life.
Contact Now
AF Series Filter Preparation unit product detailsAF series filter preparation device features: improved workability, filter element and cup cover integration, easy to replace filter element; Reduced maintenance space by up to 46%; Improved visibility and safety with a transparent, fully enclosed cup protective cover.AF Series Filter Preparation unit interior structure No.ItemMaterial1Drain bowlPC2Umbrella bafflePOM3Filtet coreHDPE4O-ringNBR5Air guiderPOM6BodyAluminun alloy7PistonPOM8SpringStainless steel9Fixed baff|ePOM10Fixing nutPOM11Drain cockPOM AF Series Fi
Contact Now
1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.
Contact Now
Preparation unit——GFR Series Installation and use1, before use, pay attention to check whether the components are damaged during transportation, and then install and use;2, please pay attention to the gas flow direction (pay attention to "→" direction) and nozzle tooth type is correct;3, please pay attention to whether the installation conditions meet the technical requirements (such as "working pressure", "use temperature range");4, please pay attention to the use of media or installation environment, try to avoid fluorine, carbon compounds, aromatic compou
Contact Now
Standard cylinder SCLB Series Use and maintenance of locking cylinders1. In the locking state, if the pressure supply of the air port A is carried out under the non-pressurized state of the air port on both sides, there is a big danger that the lock is not lifted, or the lock is suddenly lifted, and the piston rod will fly out.
Contact Now
