Thin finger-manufacture,factory,supplier from China

Product Details:Ultra-thin cylinder is a thin design of the cylinder, its thickness is thinner than the ordinary cylinder, so in the case of limited space, the use of ultra-thin cylinder has a great advantage. BESTEN's ACQ series and SDA series are ultra-thin cylinder products. The cylinder block and front and back cover are fixed with C-type buckle ring, which is compact and reliable; The inner diameter of the cylinder block is hard oxidized to increase its wear resistance and durability.

product detail：BESTEN's HFD series pneumatic fingers are a thin design with a large span and moment load capacity. Its action mode is double action type, through the double piston drive can double output, so as to obtain a larger clamping force.

product details1.The thin cylinder occupies less space, has light structure, beautiful appearance, and can bear large transverse load.

MHZL series Air gripper(parallel withauide/longerstrokelrollerbearing stye product details1. With positioning hole:The positioning hole can improve the precision and the consistency of  repeated  dismounting and  positioning;2. Multiple kinds of finger type:According to the actualusing requirements of customers, the initialposition of clamping jaw can be customized to meet the different needs under diferent working conditions.

1. Reliable structure: cylinder and back cover, piston and piston rod with riveted structure, this design makes the cylinder structure compact and reliable. 2. Surface treatment: The inner diameter of the cylinder is rolled and then subjected to hard oxidation treatment, which improves the durability and corrosion resistance of the cylinder. 3.

1. Save installation space: The dual-shaft cylinder design can parallel two single-rod thin cylinders, which can save installation space and provide greater output.2. Anti-bending and anti-torsional performance: some cylinder design with pressure head can withstand a certain side load, improving the reliability of the equipment.3. Easy installation: Part of the cylinder design with pressure head allows to be fixed from four directions, providing users with more installation options.4.

Hexagon socket bolt specifications1) The hexagonal opening allows the pin to be rounded or countersunk2) The end chamfer d<=M4 is the rolled end3) Length of incomplete thread U<=2P4) The top edge of the head can be rounded or chamfered, at the choice of the manufacturer5) The bottom edge can be round or chamfered to Dw, but there must be no burrs6) Inner six bolt standard: GB/T2672, GB/T2673, GB/T2674, GB/T6190 and GB/T6191Hex socket plug Product Parameterproduct nameHex socket plugproduct materialnickle plated ironWithstand voltage range0-1.6Mpa· PRODUCT ROLE Closed redun

Flange type cylinder installation methodFlange type installation can be divided into front flange type and back flange type, the front flange type is the use of flange and screw at the front end of the cover to fix the cylinder, the back flange type refers to the installation of the flange at the back end of the cover and the use of screws to fix, also suitable for the load movement direction and the axis of the piston rod.Front flange FA rear flange FB  External specification B尺寸和C尺寸是客户使用尺寸   可根据客户要求订做cylinder bore □ABCDEF∅G∅H成型孔32335833724710∅729.5∅11/∅7 ↧7

product details1. The flow control valve on the hydraulic brake cylinder can adjust the speed of the piston rod. Brake cylinders with built-in jump valves and brake valves can be supplied according to customer requirements to realize their jump and stop functions.When the oil in the tank reaches a small scale, it is necessary to replenish it, please use No. 40 oil and the corresponding pump.2. It is suitable for occasions that require the cylinder to move slowly and evenly.3.

1. A variety of installation forms on the back cover make the installation more convenient;2. A variety of specifications of cylinders and accessories are available for customers to choose;3. The selection of high-temperature seal materials can ensure the normal operation of the cylinder under the condition of 150°C;4. When the load changes during the work, the cylinder with sufficient output force should be selected;5.

product details1. Complete specifications, variety: full-size spot, factory direct sales, order quickly, improve procurement efficiency, service life2. Convenient installation: There are basic flange type, foot type and a variety of installation methods。

Explosion-proof PU gas pipe product detailsIts oil resistance is better, it is about fifteen to twenty times the oil resistance of natural rubber. Another is that its wear resistance is relatively good, it is more than thirty to fifty times the abrasive property of natural rubber, so we can not underestimate it. In addition, its aging resistance is also relatively good, it is about five times the aging performance of natural rubber, which is not available to other materials.

Adjustable nut  Product AdvantagesAdjustable nuts, usually used in conjunction with locking nuts, can be adjusted by adjusting the bolt to make small position adjustments to the workpiece to achieve precise positioning.

product details3R series push-pull valve is a hand-pulled valve, with manual operation, direction and shaft core coaxial characteristics, easy to operate and accurate and reliable positioning. This kind of valve adopts the sliding column structure, good sealing, small size, light weight, very convenient installation and disassembly. The inner hole is processed by special technology, which reduces the friction resistance and prolongs the service life of the product. In addition, it does not require oil lubrication and can be installed in multiple positions.

product details1.Multi-mounting makes it convenient to install and apply;2.The control joints of series of M3C, M3D,M3Y, M3R,and M3L are made of metal which has long service life and more reliable and steady performance.MV 522TB series control valve external reference spec       ModelSelector type(HS)How toorderOrdering codeS3HS05-P11ATypeS3HS selector type control set(Green)Ordering codeS3HS05-P12ATypeS3HS selector type control set(Red)Ordering codeS3HS05-P13ATypeS3HS selector type control set(Black)Applicable productsM3HS110,M3HS210Shipping:  Fact

QTH hinge press cylinder Product details1. Surface anti-oxidation coating treatment, long use time2. High hardness spring, corrosion and rust, stable and durable, low density3. Smooth piston rod, smooth operation, fine processing, smooth grinding, smooth operation, small stroke error4. Nylon presser foot: wear resistance, anti-slip, fine workmanship, smooth surface, non-slip process, uniform force when pressing material, smooth pressing material is not easy to slip, careful material selection, high product stability, long use time5.

Aluminum block for heavy duty sucker fittings Usage method1. Connect the drain valve, drain tube and suction pad respectively.2.

Threaded two way-Accessories——One-Touch Fittings(Stainless steel）Stainless steel thread double pass is a common pipe connection fittings, widely used in various industrial fields.

1. The two ends of the cylinder are equipped with adjustable buffer and fixed buffer device, which ensures smooth reversing action without impact and avoids mechanical damage.2.

CV vacuum generator External specification1, rapid response: rapid vacuum reaction, high vacuum, large vacuum flow and stable performance2, suitable for a variety of environments: widely used in medical equipment, automotive industry, textile industry, printing industry and other fieldsCV vacuum generator External specification    Model ABC DE FGHol K MLPVSpecial muffler models available  Cv-05□ 83216 10G1/8 14204.54.2 10 1455G1/8G1/8  MSS-01CV-10□CV-15□ 103520 11G1/4 2025545  15 

Preparation unit——GFR Series  Installation and use1, before use, pay attention to check whether the components are damaged during transportation, and then install and use;2, please pay attention to the gas flow direction (pay attention to "→" direction) and nozzle tooth type is correct;3, please pay attention to whether the installation conditions meet the technical requirements (such as "working pressure", "use temperature range");4, please pay attention to the use of media or installation environment, try to avoid fluorine, carbon compounds, aromatic compou

One-touch fittings—tube-tube tvp-PU series Product detailsThe product has the advantages of high universality of parts, good performance, safety and reliability, variety and specifications, and is widely used in petroleum, chemical industry, power station and other industrial sectors.One-touch fittings—tube-tube tvp-PU series External specification Model/ItemφDφPKAWeight(gPU4491429.51.7PU6612.516.53436PU881518538.55PU10101821438.1PU121221234712

Accessories——Speed controllers(Stainless steel)SL series 1.The sealant being coated on threaded portion can ensure no leakage of thethreaded connection part.2.The inserting direction of universal speed controller can be adjusted in 360°Accessories——Speed controllers(Stainless steel)SL series  External specification  Modelltem[Note1]φDRφPAφPBLCKEAEBHWeight(g)maxminSL4M5□4M5×0.89103.53027.514199.586SL401□1/8＂9147.541.5351420.5151115.5SL6M5□6M5x0.812.5103.53027.516.523.511.587.5SL601□1/8＂12.5147.541.53516.52315.51116.5SL602□1/4＂12.5181047.54116.525181430SL603□3/8＂12.522.51152.

Fisheye joint product details1, exquisite technology, a variety of specifications optional: reliable quality, advanced technology, to provide a variety of specifications for choice.2, through the ISO international system three certification, to ensure product quality and reliability.3, the factory has advanced robot automatic production line, precision processing, improve production efficiency and product quality.Fisheye joint Product Parameterproduct brandBESTENproduct materialSuperior bearing steelproduct nameSelf-lubricating fisheye bearingsproduct featureThe alloy wear-resistant layer