Separator-manufacture,factory,supplier from China

BFR Two-piece oil-water separator Product Parameter1. Maximum operating pressure: 1.0Mpa(145Psi)2.Guarantee pressure resistance: 1.5Mpa(215Psi)3. Filter cup capacity: 60cc4.

BESTEN two-piece oil Water Filter separator Product detailsIn the pneumatic transmission system, the air source processing part refers to the air filter, pressure reducing valve and oil mist, and some solenoid valves and cylinders can be oil-free lubrication (relying on grease to achieve lubrication function), there is no need to use oil mist!

product detailsAC oil-water separation filter It works by using natural filtration and gravity to break down oil and water and treat wastewater into a form that can be safely discharged. This equipment is widely used in a wide range of industries, such as mining, construction, food processing, as well as specific environmental areas such as catering oil and water separation and industrial oil and water separation.In terms of its specific working process, for example, condensate water enters the oil-water separator through the inlet connection.

PC thread through Product details1, widely used: products are widely used in machinery and equipment, textile equipment, medical equipment, food processing and other fields2, the quick joint is not suitable for what kind of environment: do not use for electrostatic sensitive occasions, will cause poor system failure, do not use for spark occasions, will cause fire hazards, do not use in cutting oil, lubricating oil and cooling liquid direct contact environmentPC thread through Product ParameternameThreaded straight jointmodelPCMaximum pressure resistance1.5Mpathe pressure range of use1～1.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

1. Magnetic characteristics: This series of cylinders are all attached with magnets, which is convenient to use with magnetic switches and other sensors to achieve better control effects. 2. Product specifications: For example, MA16×200SCA model cylinder, cylinder diameter of 16mm, stroke of 200mm, is a common specification.3. Purchase information: Products can be purchased through this official website, providing detailed product pictures, prices, parameters, specifications and other information for customer reference. 

Rodless cylinder product detailsRodless cylinders are mainly divided into magnetic coupling rodless cylinders and mechanical rodless cylinders. In a magnetically coupled rodless cylinder, the action of the piston is transmitted to the external slide through the magnetic coupling force, without the need for a piston rod. Because there is no mechanical connection between the piston and the slider, its sealing performance is excellent.

Woodworking machinery lever cylinder1, the entrance seal can effectively prevent the left and right cavities of the piston from moving each other, improve the sealing2. Hard oxidation: The use of hard oxidation process to improve the wear resistance and corrosion resistance of the cylinderWoodworking machinery lever cylinder external specifications 航运：  Factory:As a leading enterprise in China's pneumatic components production industry: Shandong Bedi Pneumatic Technology Co., Ltd. is achieving a qualitative leap, Shandong Bedi Pneumatic Technology Co., Ltd.

product detail：HLQ two-axis precision slide cylinder is a kind of cylinder with high precision and high rigidity. Its features include double precision linear guide rail, which has excellent anti-rust and dust-proof performance. Double piston rod design, double output; Three-position fixed cylinder and two-position fixed fixture, easy to install; The floating joint connects the slider to avoid extra load torque on the piston rod; A variety of external block combinations are optional; And equipped with sensor mounting groove.1.

1. Connection method: The front and rear cover and stainless steel cylinder are riveted roller package structure, which is reliable and stable. 2. Material advantage: The cylinder adopts high-precision stainless steel pipe, which has high strength and good corrosion resistance, suitable for long-term operation in harsh working environment. 3. Size advantage: Compared with ISO6432 standard cylinders of the same bore and stroke, MF series cylinders are smaller in length, suitable for space-constrained applications. 4.

Structural design: SC cylinder has a compact design, the cylinder block and the front and back cover are connected by a pillar, which increases the stability and durability of the structure. In addition, its oil storage function can effectively reduce wear during cylinder movement. company profileadvanced equipmentEnterprise honor  Factory application area1.

1. Stainless steel thread, not easy to rust, long service life 2. Imported bearing 3.

1, aluminum tube meter font, no tie rod, good anti-corrosion performance2, with sensor mounting slot, smooth buffer3, square standard cylinder, cylinder inner diameter rolling treatment4, piston seal adopts special shape bidirectional sealing structure, compact size5, with oil storage function, long service life of the cylinder  product standardcylinder bore(mm)32 40506380100 125manner of executionSDA  working mediumairAIR PRESSURE 0.1~1.0mpaMounting The front and rear covers are threadedWorking Temperature  -10~70°℃(Freeze Unselected)Buffer fo

product detail：BESTEN's HFD series pneumatic fingers are a thin design with a large span and moment load capacity. Its action mode is double action type, through the double piston drive can double output, so as to obtain a larger clamping force.

Cylinder inner diameter ( mm)61015(16)20253240506380100Mechanical joint type /MY—30005000※ Mechanically engaged rodless cylinder: The series in the table except linear guide typeAmbient temperature and fluid temperatureMechanical joint type /MYstandard specifications 40      -20       0       20       40      60       80      100      120 &nbs

Standard cylinder SAU Series product details1.Mounting add-ons are the equal as SC series.2.The seal fabric with high temperature resistance is adopted to assurance the normaloperation of cylinder at 150°℃.Standard cylinder——SAU Series  Inner structure  NO.ltemMaterial 1Rod nutCarbon steel 2Piston rodCarbon steel with 20μm chrome plated 3Front cover packingTPU 4BushingWear resistant material 5Front coverAluminum alloy 6Cushing O-ringNBR 7Cushion gasketTPU 8BarreAluminum alloy 9PistonAluminum alloy 10Piston rod O-ringNBR

MA Mini Cylinder Product detailsNo lubrication: The use of oil powder untreated copper as the shaft bearing, so that the piston rod does not need to lubricate.Durability: The cylinder body and front and back covers are oxidized by color EP coating, which not only has wear resistance, corrosion resistance and durability, but also shows a small and exquisite appearance.High temperature resistance: the cylinder adopts high temperature sealing material, so that the cylinder can work normally under high temperature conditions of 150 degrees Celsius (customers need to order from the company).MA

1、Electric cylinder installation:Mode of connectionSpecifications of products model  Lead of the screw  ball screw diameter  motor power Rated motor speed  rated thrust Maximum thrust  Rated speed of electric cylinder  Maximum stroke of electric cylinder 190 series10635150010025030007.525.51137.415512068.02058.55007.512.71118.71525.52034.0

product details1.The thin cylinder occupies less space, has light structure, beautiful appearance, and can bear large transverse load.

product details1. The flow control valve on the hydraulic brake cylinder can adjust the speed of the piston rod. Brake cylinders with built-in jump valves and brake valves can be supplied according to customer requirements to realize their jump and stop functions.When the oil in the tank reaches a small scale, it is necessary to replenish it, please use No. 40 oil and the corresponding pump.2. It is suitable for occasions that require the cylinder to move slowly and evenly.3.

Product details: 1.Hard oxidation cylinder: high strength, long service life 2.CNC fine tapping screw: international standard, close connection 3.

1.lifetimeThe cylinder life data is obtained under the following experimental conditions of our company.Not a guaranteed life value under your conditions of use.Magnetic coupling rodless cylinder /CYMechanically engaged rodless cylinder /MYtraveled distance3500km3000kmCylinder condition  Action status: GoodExternal leakage: less than 1cc/minInternal leak: less than 1cc/minAppearance: Lubricated state is good, no damageMinimum operating pressure: same as the initial valueAction status: GoodDustproof sealing belt: no detachment, dislocation, or crackAir leakage: same as initial valueMi

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

Product imagesInstall and use1. When the load changes during work, a cylinder with sufficient output force should be selected; 2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected; 3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures 4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder; 5.