Quick water connector-manufacture,factory,supplier from China

product detailsAC oil-water separation filter It works by using natural filtration and gravity to break down oil and water and treat wastewater into a form that can be safely discharged. This equipment is widely used in a wide range of industries, such as mining, construction, food processing, as well as specific environmental areas such as catering oil and water separation and industrial oil and water separation.In terms of its specific working process, for example, condensate water enters the oil-water separator through the inlet connection.

PC quick plug straight through How to choose the model thread size Better understanding of PC-G straight joint, thread size/nozzle size, save shopping time, just compare the size of the original PC-G straight thread to choose the joint you need.   PC quick plug straight through  Product Advantages1,Arbitrary rotation, flexible tube distribution: the gas pipe can also be rotated 360 degrees after installation, which can meet the needs of tube distribution in different occasions2, Selected material, not easy to trip: the use of iron nickel plated material, rust resi

BFR Two-piece oil-water separator Product Parameter1. Maximum operating pressure: 1.0Mpa(145Psi)2.Guarantee pressure resistance: 1.5Mpa(215Psi)3. Filter cup capacity: 60cc4.

product details1. Complete specifications, variety: full-size spot, factory direct sales, order quickly, improve procurement efficiency, service life2. Convenient installation: There are basic flange type, foot type and a variety of installation methods。

Pneumatic quick insert elbow PL product detailsPneumatic quick insert elbow PL is a common pneumatic joint used for quick connection of gas pipes. This joint is characterized by its design as a right Angle elbow, which allows easy connection of the air pipe to the desired direction.BESTEN offers the APL series and the PL series of gas pipe quick and quick insert bent joints, which conform to the M5 mouth and are available in a variety of models such as APL4-M5, APL6-M5, etc.

Quick twist PL bend Product details1,Simple and smart,kinds of models,soit meets any stringing pipe requirements.2, Even ifinstalled.plastic pipe can rotate at random.3, Release ring adopts ellipse design,so removing for it is m ore convenient.4, All taper pipe threads paints Teflon leakage-proofrubber,so seal property is good.5, AIl PC type directly connects hexagonal socket hole of grading belt,so itis convenientto install in the narrow.Quick twist PL bend   product standard FluidClean compressed air,vacuumMax.working pressure1.32Mpa(13.5kgf/cm²)Pressure rangeNormal

BESTEN two-piece oil Water Filter separator Product detailsIn the pneumatic transmission system, the air source processing part refers to the air filter, pressure reducing valve and oil mist, and some solenoid valves and cylinders can be oil-free lubrication (relying on grease to achieve lubrication function), there is no need to use oil mist!

Aluminum-plastic pipe knowledge (must see before shooting, so as not to shoot wrong)1,4 points: The aluminum plastic pipe of 1216(commonly known as 16) is connected with the aluminum plastic pipe with an inner diameter of 12mm and an outer diameter of 16mm2,6 points: The aluminum plastic pipe of 1620(commonly known as 20) is connected with an aluminum plastic pipe with an inner diameter of 16m and an outer diameter of 20mm3,1 inch: 2025(commonly known as 25) aluminum-plastic pipe fittings are connected with an inner diameter of 20mm and an outer diameter of 25m aluminum-plastic pipe4,1 inch an

product detailsK34R6 control valve is a hand-rotating valve, mainly used to control the push and pull valve of the cylinder. This type of valve is similar to the K34R7-8, but has its own unique features and attributes. Depending on their model and design, the K34R6 series regulator is available in a variety of types and configurations. For example, the K34R6-8 is equipped with a variety of connector mufflers, such as 4MM, 6MM, 8MM, 10MM and 12MM. In addition, the K34R6-8D is a four-hole design at the bottom.

PC thread through Product details1, widely used: products are widely used in machinery and equipment, textile equipment, medical equipment, food processing and other fields2, the quick joint is not suitable for what kind of environment: do not use for electrostatic sensitive occasions, will cause poor system failure, do not use for spark occasions, will cause fire hazards, do not use in cutting oil, lubricating oil and cooling liquid direct contact environmentPC thread through Product ParameternameThreaded straight jointmodelPCMaximum pressure resistance1.5Mpathe pressure range of use1～1.

product detailsThe PL series is a series of pneumatic accessories, including gas pipe fittings, quick threaded elbows, quick connecting cylinders, etc. These accessories are quick to install and easy to use, and are suitable for a wide variety of pneumatic equipment and systems. For example, the PL series has L-threaded two-way pipe joint PL802, which is usually used to connect pneumatic hoses, and its design structure can effectively prevent the hose from falling off and ensure the stable flow of gas.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

Accessories One Touch Fittings PC series product detailsPC thread through is a pneumatic joint product from BESTEN. This kind of joint belongs to PC class, has the characteristics of quick insertion and removal, and is widely used in pneumatic system. However, there are many specific models and specifications, such as KQ2H-G series, KQ2S-G series, etc., which each have different connection thread types, such as M type, R type, etc.

Product imagesInstall and use1. When the load changes during work, a cylinder with sufficient output force should be selected; 2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected; 3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures 4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder; 5.

TR two-shaft cylinder installation and use1. When the load changes during the work, the cylinder with sufficient output force should be selected.2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected.3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take appropriate protective measures.4. Before the cylinder is connected to the pipeline, the stolen goods in the pipeline must be removed to prevent debris from entering the cylinder.5.

1. Compact structure: the gas-liquid damping cylinder has compact structure and small size, which is suitable for the increasingly miniaturized main machine supporting needs and easy to install.2. Easy maintenance: the filter is designed with semi-automatic water discharge device, which can automatically drain sewage when the host stops gas, and can also be manually drained. The pressure reducing valve is sensitive and stable.3.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take necessary protective measures;4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected; 3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

product details1.The thin cylinder occupies less space, has light structure, beautiful appearance, and can bear large transverse load.

product details1.Multi-mounting makes it convenient to install and apply;2.The control joints of series of M3C, M3D,M3Y, M3R,and M3L are made of metal which has long service life and more reliable and steady performance.MV 522TB series control valve external reference spec       ModelSelector type(HS)How toorderOrdering codeS3HS05-P11ATypeS3HS selector type control set(Green)Ordering codeS3HS05-P12ATypeS3HS selector type control set(Red)Ordering codeS3HS05-P13ATypeS3HS selector type control set(Black)Applicable productsM3HS110,M3HS210Shipping:  Fact

1. Magnetic characteristics: This series of cylinders are all attached with magnets, which is convenient to use with magnetic switches and other sensors to achieve better control effects. 2. Product specifications: For example, MA16×200SCA model cylinder, cylinder diameter of 16mm, stroke of 200mm, is a common specification.3. Purchase information: Products can be purchased through this official website, providing detailed product pictures, prices, parameters, specifications and other information for customer reference. 

Asphalt spreader cylinder assembly product detailsAsphalt spreader, also known as asphalt spreader, is a kind of pavement construction machinery, mainly used for spraying hot asphalt, emulsified asphalt, residual oil and other liquid asphalt. It not only has the ability to transport liquid asphalt, but also can be operated while driving, and is widely used in asphalt pavement of asphalt bottom, bonding layer and waterproof layer.