PU gas pipe quick connector-manufacture,factory,supplier from China

Explosion-proof PU gas pipe product detailsIts oil resistance is better, it is about fifteen to twenty times the oil resistance of natural rubber. Another is that its wear resistance is relatively good, it is more than thirty to fifty times the abrasive property of natural rubber, so we can not underestimate it. In addition, its aging resistance is also relatively good, it is about five times the aging performance of natural rubber, which is not available to other materials.

PC quick plug straight through How to choose the model thread size Better understanding of PC-G straight joint, thread size/nozzle size, save shopping time, just compare the size of the original PC-G straight thread to choose the joint you need.   PC quick plug straight through  Product Advantages1,Arbitrary rotation, flexible tube distribution: the gas pipe can also be rotated 360 degrees after installation, which can meet the needs of tube distribution in different occasions2, Selected material, not easy to trip: the use of iron nickel plated material, rust resi

1. Gas-liquid converters can be used to obtain higher pressure and strength where greater output is required. 2. An oil cylinder, also known as a hydraulic cylinder or hydraulic cylinder, is an executive element in a hydraulic system that generates linear motion or force through the pressure of the liquid. The cylinder is usually used in conjunction with the gas-liquid supercharger.

Pneumatic quick insert elbow PL product detailsPneumatic quick insert elbow PL is a common pneumatic joint used for quick connection of gas pipes. This joint is characterized by its design as a right Angle elbow, which allows easy connection of the air pipe to the desired direction.BESTEN offers the APL series and the PL series of gas pipe quick and quick insert bent joints, which conform to the M5 mouth and are available in a variety of models such as APL4-M5, APL6-M5, etc.

Quick twist PL bend Product details1,Simple and smart,kinds of models,soit meets any stringing pipe requirements.2, Even ifinstalled.plastic pipe can rotate at random.3, Release ring adopts ellipse design,so removing for it is m ore convenient.4, All taper pipe threads paints Teflon leakage-proofrubber,so seal property is good.5, AIl PC type directly connects hexagonal socket hole of grading belt,so itis convenientto install in the narrow.Quick twist PL bend   product standard FluidClean compressed air,vacuumMax.working pressure1.32Mpa(13.5kgf/cm²)Pressure rangeNormal

One-touch fittings—tube-tube tvp-PU series Product detailsThe product has the advantages of high universality of parts, good performance, safety and reliability, variety and specifications, and is widely used in petroleum, chemical industry, power station and other industrial sectors.One-touch fittings—tube-tube tvp-PU series External specification Model/ItemφDφPKAWeight(gPU4491429.51.7PU6612.516.53436PU881518538.55PU10101821438.1PU121221234712

Aluminum-plastic pipe knowledge (must see before shooting, so as not to shoot wrong)1,4 points: The aluminum plastic pipe of 1216(commonly known as 16) is connected with the aluminum plastic pipe with an inner diameter of 12mm and an outer diameter of 16mm2,6 points: The aluminum plastic pipe of 1620(commonly known as 20) is connected with an aluminum plastic pipe with an inner diameter of 16m and an outer diameter of 20mm3,1 inch: 2025(commonly known as 25) aluminum-plastic pipe fittings are connected with an inner diameter of 20mm and an outer diameter of 25m aluminum-plastic pipe4,1 inch an

product details1. Complete specifications, variety: full-size spot, factory direct sales, order quickly, improve procurement efficiency, service life2. Convenient installation: There are basic flange type, foot type and a variety of installation methods。

product detailsThe PL series is a series of pneumatic accessories, including gas pipe fittings, quick threaded elbows, quick connecting cylinders, etc. These accessories are quick to install and easy to use, and are suitable for a wide variety of pneumatic equipment and systems. For example, the PL series has L-threaded two-way pipe joint PL802, which is usually used to connect pneumatic hoses, and its design structure can effectively prevent the hose from falling off and ensure the stable flow of gas.

One-touch fittings—tube-tube type-PE series product detailsPE series straight pipe is a common pipe connection fittings, mainly used to transfer the fluid medium in the pipe directly from one pipe to another pipe. BESTEN is one of the leading brands on the market offering PE series straight-through tubes. Such products can be selected according to different specifications and models to meet the needs of various working conditions.

product detailsK34R6 control valve is a hand-rotating valve, mainly used to control the push and pull valve of the cylinder. This type of valve is similar to the K34R7-8, but has its own unique features and attributes. Depending on their model and design, the K34R6 series regulator is available in a variety of types and configurations. For example, the K34R6-8 is equipped with a variety of connector mufflers, such as 4MM, 6MM, 8MM, 10MM and 12MM. In addition, the K34R6-8D is a four-hole design at the bottom.

Accessories Silencers PAL series Product detailsAn aluminum foam muffler comprises an outer cylinder, an intake pipe with exhaust holes, an exhaust pipe and a front and rear end cover. An aluminum foam disk with a through hole is arranged parallel between the outer cylinder, the intake pipe and the rear end cover to separate the space into a plurality of chambers. Each aluminum foam disk is provided with a round large hole and its periphery is closely connected with the inner wall of the outer cylinder.

product detail：TN series twin-shaft cylinder，It is characterized by the use of plastic polyurethane material, which meets the environmental requirements of ROHS. With high elasticity, its small bending radius allows PU tubes to pass through tight Spaces. In addition, the cylinder also has the characteristics of anti-knotting, which has better anti-knotting effect than other plastic pipes. At the same time, it also has excellent plasticity, can withstand repeated expansion and contraction, and anti-wear characteristics, so that it can be used for a long time in a wear-prone environment.1.

Pneumatic accessory Y-fitting product detailsThe Y-joint is a common pneumatic joint used to connect components such as air pipes and cylinders. This joint is characterized by its double "Y" shape design, which can divide a gas pipe into four branch tubes. Therefore, it is very useful in applications where one input signal needs to be shunt to multiple output devices. BESTEN offers a wide range of pneumatic fittings for a wide range of pneumatic applications, available in a wide range of materials and configurations, easy to install and suitable for project requirements.

1. Compact structure: the gas-liquid damping cylinder has compact structure and small size, which is suitable for the increasingly miniaturized main machine supporting needs and easy to install.2. Easy maintenance: the filter is designed with semi-automatic water discharge device, which can automatically drain sewage when the host stops gas, and can also be manually drained. The pressure reducing valve is sensitive and stable.3.

PC thread through Product details1, widely used: products are widely used in machinery and equipment, textile equipment, medical equipment, food processing and other fields2, the quick joint is not suitable for what kind of environment: do not use for electrostatic sensitive occasions, will cause poor system failure, do not use for spark occasions, will cause fire hazards, do not use in cutting oil, lubricating oil and cooling liquid direct contact environmentPC thread through Product ParameternameThreaded straight jointmodelPCMaximum pressure resistance1.5Mpathe pressure range of use1～1.

 3R/4R Manual Valve 1. When installing, pay attention to whether the gas flow direction and the nozzle tooth shape are correct, and the use of media needs to be filtered through a 40μm filter element;2. The gas flow direction P is the intake air, A, (B) is the working port, and R and (S) are the exhaust port;3.

Threaded two way-Accessories——One-Touch Fittings(Stainless steel）Stainless steel thread double pass is a common pipe connection fittings, widely used in various industrial fields.

Preparation unit——GFR Series  Installation and use1, before use, pay attention to check whether the components are damaged during transportation, and then install and use;2, please pay attention to the gas flow direction (pay attention to "→" direction) and nozzle tooth type is correct;3, please pay attention to whether the installation conditions meet the technical requirements (such as "working pressure", "use temperature range");4, please pay attention to the use of media or installation environment, try to avoid fluorine, carbon compounds, aromatic compou

4HV series Hand lever valve(4/2 way, 4/3 way)  product details1. Large flow rate and small pressure loss;2. A variety of installation structure, easy installation;3. A variety of models are available;4. Pay attention to the direction of gas flow and whether the tooth shape is correct during installation, and the medium used needs to be filtered through a 40μm filter element;5. The gas flow direction P is the intake air, A, (B) is the working port, and R and (S) are the exhaust port;6.

4M series Solenoid valve(5/2 way) product details1. Equipped with manual device, easy to install and debug;2. A variety of standard voltage levels are available;3. When installing, pay attention to whether the gas flow direction and the nozzle tooth shape are correct, and the use of media needs to be filtered through a 40μm filter element;4. The gas flow direction P is the intake air, A, (B) is the working port, and R and (S) are the exhaust port;5.

1. High-strength material: The cylinder is made of high-precision stainless steel pipe, which is not only of high strength, but also has good corrosion resistance, suitable for use under various environmental conditions.2. Standardized products: MA series mini cylinders provide a variety of specifications, including different cylinder diameters and stroke lengths, as well as the corresponding installation accessories, so that customers can choose the right products according to their specific needs.3.

1. Connection method: The front and rear cover and stainless steel cylinder are riveted roller package structure, which is reliable and stable. 2. Material advantage: The cylinder adopts high-precision stainless steel pipe, which has high strength and good corrosion resistance, suitable for long-term operation in harsh working environment. 3. Size advantage: Compared with ISO6432 standard cylinders of the same bore and stroke, MF series cylinders are smaller in length, suitable for space-constrained applications. 4.

Accessories One Touch Fittings PC series product detailsPC thread through is a pneumatic joint product from BESTEN. This kind of joint belongs to PC class, has the characteristics of quick insertion and removal, and is widely used in pneumatic system. However, there are many specific models and specifications, such as KQ2H-G series, KQ2S-G series, etc., which each have different connection thread types, such as M type, R type, etc.