Pneumatic Air Cylinder SC-manufacture,factory,supplier from China

product presentationThe SC cylinder is a standard cylinder produced by BESTEN and is widely recognized for its special bidirectional sealing structure and smooth buffer regulation. It adopts special shape bidirectional sealing structure, and has the characteristics of smooth buffer adjustment and high temperature resistant sealing material.

Structural design: SC cylinder has a compact design, the cylinder block and the front and back cover are connected by a pillar, which increases the stability and durability of the structure. In addition, its oil storage function can effectively reduce wear during cylinder movement. company profileadvanced equipmentEnterprise honor  Factory application area1.

SC sequence cylinders Product details1. Choose high-temperature sealing substances to make certain that the cylinder works commonly underneath 150°C conditions;2. When the load adjustments at some point of work, a cylinder with adequate output pressure ought to be selected;3. The grime need to be cleaned earlier than the cylinder is linked to the pipeline, and the medium used need to be filtered by using a filter aspect of greater than 40μm to stop particles from coming into the cylinder;4.

Pneumatic accessories PYB series   product detailsThe PYB series of pneumatic accessories is a common pneumatic joint, which is mainly used to realize the shunt or confluence of the air source.

SC series cylinders Product details1. Choose high-temperature sealing materials to ensure that the cylinder works normally under 150°C conditions;2. When the load changes during work, a cylinder with sufficient output force should be selected;3. The dirt should be cleaned before the cylinder is connected to the pipeline, and the medium used should be filtered by a filter element of more than 40μm to prevent debris from entering the cylinder;4.

Pneumatic accessory single ear CA product detailsWhen the load and the axis of the piston rod should be uniformly installed in the earring type and trunnion type cylinder, the swing of the cylinder and the swing of the load should be ensured in a plane otherwise, the light seal will be worn, causing air leakage and reducing the service life of the cylinder; Sometimes, the cylinder may have a striking action, which may cause damage to the human body and the device.

Pneumatic quick insert elbow PL product detailsPneumatic quick insert elbow PL is a common pneumatic joint used for quick connection of gas pipes. This joint is characterized by its design as a right Angle elbow, which allows easy connection of the air pipe to the desired direction.BESTEN offers the APL series and the PL series of gas pipe quick and quick insert bent joints, which conform to the M5 mouth and are available in a variety of models such as APL4-M5, APL6-M5, etc.

Pneumatic accessory Y-fitting product detailsThe Y-joint is a common pneumatic joint used to connect components such as air pipes and cylinders. This joint is characterized by its double "Y" shape design, which can divide a gas pipe into four branch tubes. Therefore, it is very useful in applications where one input signal needs to be shunt to multiple output devices. BESTEN offers a wide range of pneumatic fittings for a wide range of pneumatic applications, available in a wide range of materials and configurations, easy to install and suitable for project requirements.

Open and close type gear air claw Product detailsA parallel opening and closing air claw comprises a cylinder block and a claw block for diffusion and polymerization movement relative to the cylinder block at one end of the cylinder block, characterized in that: The parallel opening and closing air claw comprises a piston, one end of the piston is provided with a concave part of the concave table, the bottom of the concave part is provided with a first ring buffer pad, the upper end of the cylinder body is provided with the concave part of the concave table shaped convex part.Open and clo

1, clear thread, simple installation: surface treatment process, good performance, the use of high-strength raw materials is not easy to break2, alloy material, military quality: the selection of high-precision material, hardness is not easy to deformation, long service life3, compact structure, convenient installation: thickened frame base process, more stable, more impact resistanceProduct Parametercylinder bore\SymbolsA ACADAEBDE32142489427.527.546.51240159541053232541650175691063131642063190691213333752080214861283333932510022991138373711025125279119160464613432    

Pneumatic accessories PZB series External specification Model\itemφD RLAEC中PKφJJBJCHWeight(gPZB60161/8＂7.539.527.547.512.56.53.28161215.2PZB6021/4＂1030.550.51420.4PZB6033/8＂1132521727PZB80181/8＂7.54630.553.5158.54.39.5191420.9PZB8021/4＂1033561423.8PZB8033/8＂1134.557.51729.9PZB8041/2＂1438.561.52143.5PZB1002101/4＂1052.536.56318214.311221733.5PZB10033/8＂1137.5641736.5PZB10041/2＂1441.5682149.2PZB1203123/8＂1159.5427221234.313262156.5PZB12041/2＂1445752165.4

HFK series  Air gripper product details6.  according to the actual using requirements of customers, the initial position of clamping jaw can be customized to meet the different needs under different working conditions.7. Can be mounted from three directions:With mounting holes on the side and tail.8. With positioning hole:THE positioning hole can improve the can improve the precision and the consistency of reperted dismounting and positing.HFK series  Air gripper(parallelstyle——roller bearing) interior structureNOltemMaterialNOIte mMaterial1PinStainless

Product detailsAR2000 series pressure reducing valve is an important pneumatic equipment, mainly used to adjust and regulate the pressure of the air source. This kind of equipment has the functions of decompression and pressure regulation, and is widely used in various pneumatic equipment and systems. The nozzle diameter is less than 1/2 inch and the pressure rating is 1-2Mpa.

Product imagesInstall and use1. When the load changes during work, a cylinder with sufficient output force should be selected; 2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected; 3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures 4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder; 5.

product detailsThe 4A300 series air valve is an advanced pneumatic component available in 5/2-pass and 5/3-pass types. Its characteristic is the sliding column structure, which ensures good sealing performance and fast reaction ability. Dual head air control with memory function, can respond quickly when the demand changes. The inner hole is processed by special technology, which reduces the friction resistance, thus reducing the starting pressure and prolonging the service life of the product. This valve does not require additional oil lubrication, reducing the amount of maintenance work.

MHZL series Air gripper(parallel withauide/longerstrokelrollerbearing stye product details1. With positioning hole:The positioning hole can improve the precision and the consistency of  repeated  dismounting and  positioning;2. Multiple kinds of finger type:According to the actualusing requirements of customers, the initialposition of clamping jaw can be customized to meet the different needs under diferent working conditions.

Woodworking machinery lever cylinder1, the entrance seal can effectively prevent the left and right cavities of the piston from moving each other, improve the sealing2. Hard oxidation: The use of hard oxidation process to improve the wear resistance and corrosion resistance of the cylinderWoodworking machinery lever cylinder external specifications 航运：  Factory:As a leading enterprise in China's pneumatic components production industry: Shandong Bedi Pneumatic Technology Co., Ltd. is achieving a qualitative leap, Shandong Bedi Pneumatic Technology Co., Ltd.

product detailsThe PL series is a series of pneumatic accessories, including gas pipe fittings, quick threaded elbows, quick connecting cylinders, etc. These accessories are quick to install and easy to use, and are suitable for a wide variety of pneumatic equipment and systems. For example, the PL series has L-threaded two-way pipe joint PL802, which is usually used to connect pneumatic hoses, and its design structure can effectively prevent the hose from falling off and ensure the stable flow of gas.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take necessary protective measures;4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

1. Compact structure: the gas-liquid damping cylinder has compact structure and small size, which is suitable for the increasingly miniaturized main machine supporting needs and easy to install.2. Easy maintenance: the filter is designed with semi-automatic water discharge device, which can automatically drain sewage when the host stops gas, and can also be manually drained. The pressure reducing valve is sensitive and stable.3.

product detailsVacuum generator is an advanced pneumatic component, its main function is to use positive pressure source to produce negative pressure. The device is relatively simple in structure, small in size and light in weight, easy to install and does not require additional maintenance. It is through the flow of compressed air to form a certain degree of vacuum, compared with the vacuum pump, the vacuum generator has many advantages, including low cost, high efficiency, clean, economic and miniaturization.

BESTEN two-piece oil Water Filter separator Product detailsIn the pneumatic transmission system, the air source processing part refers to the air filter, pressure reducing valve and oil mist, and some solenoid valves and cylinders can be oil-free lubrication (relying on grease to achieve lubrication function), there is no need to use oil mist!

4A200 series Air valve(5/2 way,5/3 way) product details1.No need to add oil for lubrication.2.Integrate with the manifold to save installation space.4A200 series Air valve(5/2 way,5/3 way)  Inner structureNo.ItemNo.ItemNo.ItemNoItemNo.ItemNo.ItemNoItemNo.ItemNo.Item1Screw3Bottom cover5Body7Spool9Piston11O-ring13Screw15Return Spring17E Clip2Spring4Bottom cover gasket6O-ring8Wear ring10Pilot body12Screw14Spring holder16Spring holder18Side cover 4A200 series Air valve(5/2 way,5/3 way) External specification Model\ItemABCDE4A210-061/8"1/8"1822.704A210-081/8"1/4&q

Accessories Silencers BSL seriesWhen compressed air is discharged into the atmosphere through pneumatic components at high speed, it will produce harsh noise. In order to overcome this noise, a muffler is often installed at the exhaust port, and a muffler and throttle valve can also be combined to form a muffler throttlingAccessories Silencers BSL series  inner structure Accessories——Silencers-BSL series  External specification Model/ItemRLCHWeight(gBSLM5M5×0.83.519.582.9BSL011/8＂624126.7BSL021/4＂8301511.6BSL033/8＂938.51922BSL041/2＂10.5462235