K34R6 HV-manufacture,factory,supplier from China

product detailsK34R6 control valve is a hand-rotating valve, mainly used to control the push and pull valve of the cylinder. This type of valve is similar to the K34R7-8, but has its own unique features and attributes. Depending on their model and design, the K34R6 series regulator is available in a variety of types and configurations. For example, the K34R6-8 is equipped with a variety of connector mufflers, such as 4MM, 6MM, 8MM, 10MM and 12MM. In addition, the K34R6-8D is a four-hole design at the bottom.

1, exquisite technology, high standard product material2, domestic high quality screw, original synchronous wheel3, high-quality bearings Specifications of products

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

Adjustable nut  Product AdvantagesAdjustable nuts, usually used in conjunction with locking nuts, can be adjusted by adjusting the bolt to make small position adjustments to the workpiece to achieve precise positioning.

Flange type cylinder installation methodFlange type installation can be divided into front flange type and back flange type, the front flange type is the use of flange and screw at the front end of the cover to fix the cylinder, the back flange type refers to the installation of the flange at the back end of the cover and the use of screws to fix, also suitable for the load movement direction and the axis of the piston rod.Front flange FA rear flange FB  External specification B尺寸和C尺寸是客户使用尺寸   可根据客户要求订做cylinder bore □ABCDEF∅G∅H成型孔32335833724710∅729.5∅11/∅7 ↧7

BFR Two-piece oil-water separator Product Parameter1. Maximum operating pressure: 1.0Mpa(145Psi)2.Guarantee pressure resistance: 1.5Mpa(215Psi)3. Filter cup capacity: 60cc4.

Explosion-proof PU gas pipe product detailsIts oil resistance is better, it is about fifteen to twenty times the oil resistance of natural rubber. Another is that its wear resistance is relatively good, it is more than thirty to fifty times the abrasive property of natural rubber, so we can not underestimate it. In addition, its aging resistance is also relatively good, it is about five times the aging performance of natural rubber, which is not available to other materials.

Preparation unit——GFR Series  Installation and use1, before use, pay attention to check whether the components are damaged during transportation, and then install and use;2, please pay attention to the gas flow direction (pay attention to "→" direction) and nozzle tooth type is correct;3, please pay attention to whether the installation conditions meet the technical requirements (such as "working pressure", "use temperature range");4, please pay attention to the use of media or installation environment, try to avoid fluorine, carbon compounds, aromatic compou

product detail：BESTEN's HFD series pneumatic fingers are a thin design with a large span and moment load capacity. Its action mode is double action type, through the double piston drive can double output, so as to obtain a larger clamping force.

1.factory direct sales, mass customization2.source manufacturers, reliable quality3.stable operation, non-standard customization Product Parameternameunit136 cylinder direct connectionServo motor power(KW)4.455.57.5Rated speed of servo motor(r/min)1500200015001500Rated torque of servo motor(N.m)28.623.93548Lead of the screwmm)12ball screw diameter (∅)50(customization)Rated dynamic load of lead screwKgf9500Matching planetary deceleration ratio6:17:18:17:18:15:16:14:1Rated thrust of electric cylinder(KN)76891027485789385.4Rated speed of electric cylinder(mm/s5042.837.55750605062.5Elect

PC quick plug straight through How to choose the model thread size Better understanding of PC-G straight joint, thread size/nozzle size, save shopping time, just compare the size of the original PC-G straight thread to choose the joint you need.   PC quick plug straight through  Product Advantages1,Arbitrary rotation, flexible tube distribution: the gas pipe can also be rotated 360 degrees after installation, which can meet the needs of tube distribution in different occasions2, Selected material, not easy to trip: the use of iron nickel plated material, rust resi

product details1. Complete specifications, variety: full-size spot, factory direct sales, order quickly, improve procurement efficiency, service life2. Convenient installation: There are basic flange type, foot type and a variety of installation methods。

TCL Series Tri-rod cylinder product detailsTCL series three-rod cylinder is a three-axis cylinder that implements JIS standards. It is made of two guide rods made of special bearing steel, equipped with linear bearing or bronze bearing guide, and has high torsion resistance and lateral load resistance. This design makes the cylinder suitable for use in situations where push action is required, or where high precision and load capacity are required.In addition, the working medium of the TCL/TCM series cylinder is air, which needs to be filtered by a 40 micron filter.

1. Stainless steel thread, not easy to rust, long service life 2. Imported bearing 3.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

Characteristics of SU Standard Cylinder1. SU series standard cylinder is the market standard cylinder;2. The seal adopts special-shaped two-way sealing structure, compact size, and self-lubricating function of oil removal;3. It is a meter-shaped cylinder barrel with a built-in tie rod cylinder, and the front and rear covers and cylinder barrels are connected with tie rod pillars, which is stable and reliable;4. When the load changes during work, a cylinder with sufficient output force should be selected;5.

BSC series holding cylinder  product detailsThe BSC series of holding cylinders is a product of the BESTEN brand, which is derived from the combination of standard cylinders and locking devices. A notable feature of this cylinder is that it can be locked to stop at any position in the stroke.

1, with the limit switch installation, the electric cylinder position or stroke positioning upper and lower limits, magnetic switch2, high-end custom servo electric cylinder: can be customized 10-5000mm, can provide thrust, stroke, speed and special customization3, low noise and smooth movement: high speed, high precision movement, smooth movement, low noise, unique anti-turning function to ensure high-precision position control and high safety of the equipment4, different installation options: focus on electric cylinder focus on quality products Specifications of productsnameunit170 cyli

SAI standard cylinde Product details1. Bore size:32,40,50,63,80 100,125,160,20;2. Adjustable air buffer:With adjustable air buffer on the front and back cover;3. Extruded body with switch groove:With switch groove on the two sides of body,  the counterpart sensor switch type is: CMSE\DMSE;4. Four kinds of cylinder joints:I Knuckle、  Y Knuckle、 Floating Joint、 Universal Join；5. Multi-mounting accessories：LB\FA\FB\CA\CB\CR\FTC\TCM1\TCM2\TC.Standard cylinder——SAl Series interior structure   NO.ItemMaterial 1Rod nutCarbon steellStain

Edge banding machine conveyor chain block  product details1, the speed is very low noise: the operation speed is uniform, and the mechanical coordination works to improve the efficiency；2, the use of a wide range of purposes: through the special structure, the edge sealing plate and the edge sealing material on both sides of the adhesive uniform, to ensure that the adhesive force is more firm；3, a variety of models: purchase on demand, a variety of models, according to workmanship needs, free to choose with.Shipping: Factory：As a chief in China's pneumatic ele

product presentationThe SC cylinder is a standard cylinder produced by BESTEN and is widely recognized for its special bidirectional sealing structure and smooth buffer regulation. It adopts special shape bidirectional sealing structure, and has the characteristics of smooth buffer adjustment and high temperature resistant sealing material.

CXSM series Twin-rod cylinder product detailsThe CXSM two-shaft cylinder is compact and flexible in design, and the cylinder diameter is available in a variety of specifications, so it can meet the needs of different applications. In addition, it features high non-rotating accuracy, dual port position, standard magnetic induction and buffer buffering. The thread of CXSM two-axis cylinder is washed, smooth and smooth, and the inner hole is processed by special processing technology. The friction resistance is low, and the starting pressure is low, which can extend the service life.

Product details: 1.304 stainless steel thread, provide a variety of installation methods 2. Limit switch card slot, control cylinder back to the origin 3. Oil injection hole: add well before leaving the factory, simple maintenance4.

Fisheye joint product details1, exquisite technology, a variety of specifications optional: reliable quality, advanced technology, to provide a variety of specifications for choice.2, through the ISO international system three certification, to ensure product quality and reliability.3, the factory has advanced robot automatic production line, precision processing, improve production efficiency and product quality.Fisheye joint Product Parameterproduct brandBESTENproduct materialSuperior bearing steelproduct nameSelf-lubricating fisheye bearingsproduct featureThe alloy wear-resistant layer