HFK series Air gripper-manufacture,factory,supplier from China

HFK series  Air gripper product details6.  according to the actual using requirements of customers, the initial position of clamping jaw can be customized to meet the different needs under different working conditions.7. Can be mounted from three directions:With mounting holes on the side and tail.8. With positioning hole:THE positioning hole can improve the can improve the precision and the consistency of reperted dismounting and positing.HFK series  Air gripper(parallelstyle——roller bearing) interior structureNOltemMaterialNOIte mMaterial1PinStainless

MHZL series Air gripper(parallel withauide/longerstrokelrollerbearing stye product details1. With positioning hole:The positioning hole can improve the precision and the consistency of  repeated  dismounting and  positioning;2. Multiple kinds of finger type:According to the actualusing requirements of customers, the initialposition of clamping jaw can be customized to meet the different needs under diferent working conditions.

4A200 series Air valve(5/2 way,5/3 way) product details1.No need to add oil for lubrication.2.Integrate with the manifold to save installation space.4A200 series Air valve(5/2 way,5/3 way)  Inner structureNo.ItemNo.ItemNo.ItemNoItemNo.ItemNo.ItemNoItemNo.ItemNo.Item1Screw3Bottom cover5Body7Spool9Piston11O-ring13Screw15Return Spring17E Clip2Spring4Bottom cover gasket6O-ring8Wear ring10Pilot body12Screw14Spring holder16Spring holder18Side cover 4A200 series Air valve(5/2 way,5/3 way) External specification Model\ItemABCDE4A210-061/8"1/8"1822.704A210-081/8"1/4&q

Open and close type gear air claw Product detailsA parallel opening and closing air claw comprises a cylinder block and a claw block for diffusion and polymerization movement relative to the cylinder block at one end of the cylinder block, characterized in that: The parallel opening and closing air claw comprises a piston, one end of the piston is provided with a concave part of the concave table, the bottom of the concave part is provided with a first ring buffer pad, the upper end of the cylinder body is provided with the concave part of the concave table shaped convex part.Open and clo

Product details3A100 series air control valve, also known as three-way two-position air control valve, adopts sliding column structure to ensure good sealing performance and sensitive response. The dual-head gas-controlled portion of the valve has a memory function, that is, it can remain in its original state after a power failure or loss of air pressure. The inner hole is processed by special technology, with low friction resistance, low starting pressure and long service life. In addition, no lubrication is required and maintenance is easy.

product detailsThe 4A300 series air valve is an advanced pneumatic component available in 5/2-pass and 5/3-pass types. Its characteristic is the sliding column structure, which ensures good sealing performance and fast reaction ability. Dual head air control with memory function, can respond quickly when the demand changes. The inner hole is processed by special technology, which reduces the friction resistance, thus reducing the starting pressure and prolonging the service life of the product. This valve does not require additional oil lubrication, reducing the amount of maintenance work.

Pneumatic accessories PYB series   product detailsThe PYB series of pneumatic accessories is a common pneumatic joint, which is mainly used to realize the shunt or confluence of the air source.

1, clear thread, simple installation: surface treatment process, good performance, the use of high-strength raw materials is not easy to break2, alloy material, military quality: the selection of high-precision material, hardness is not easy to deformation, long service life3, compact structure, convenient installation: thickened frame base process, more stable, more impact resistanceProduct Parametercylinder bore\SymbolsA ACADAEBDE32142489427.527.546.51240159541053232541650175691063131642063190691213333752080214861283333932510022991138373711025125279119160464613432    

Preparation unit——GL Series product detailsBSTEN's GL series High efficiency compressed air filters contain four filter grades, the Deep Filtration Grade (VL), for the reliable removal of 3μm solid particles, showing 99.95% filtration performance. Its innovative filter element design provides optimal flow characteristics at minimum pressure drop.

Accessories Silencers BSL seriesWhen compressed air is discharged into the atmosphere through pneumatic components at high speed, it will produce harsh noise. In order to overcome this noise, a muffler is often installed at the exhaust port, and a muffler and throttle valve can also be combined to form a muffler throttlingAccessories Silencers BSL series  inner structure Accessories——Silencers-BSL series  External specification Model/ItemRLCHWeight(gBSLM5M5×0.83.519.582.9BSL011/8＂624126.7BSL021/4＂8301511.6BSL033/8＂938.51922BSL041/2＂10.5462235

BSLM Series  Accessories Silencers  Product detailsBy damping the air flow or increasing the exhaust area and other methods to reduce the exhaust speed and exhaust power, so as to achieve the purpose of reducing noise, absorption muffler expansion interference muffler: expansion interference absorption muffler, in the exhaust port of the pneumatic system, especially in the exhaust port of the reversing valve installed mufflerBSLM Series- Accessories——Silencers Inlet pressure and outlet flow rate BSLM Series- Accessories——Silencers  External specification Model/lte

Product detailsAR2000 series pressure reducing valve is an important pneumatic equipment, mainly used to adjust and regulate the pressure of the air source. This kind of equipment has the functions of decompression and pressure regulation, and is widely used in various pneumatic equipment and systems. The nozzle diameter is less than 1/2 inch and the pressure rating is 1-2Mpa.

Standard cylinder SCLB Series Use and maintenance of locking cylinders1. In the locking state, if the pressure supply of the air port A is carried out under the non-pressurized state of the air port on both sides, there is a big danger that the lock is not lifted, or the lock is suddenly lifted, and the piston rod will fly out.

1. Aluminum alloy cylinder body, high strength, no deformation, no air leakage, long service life2. Compact size, tight link and good sealing3. No shaking, no jamming, no air leakage, high strength, no deformation4. Non-standard series customization1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3.

TCL Series Tri-rod cylinder product detailsTCL series three-rod cylinder is a three-axis cylinder that implements JIS standards. It is made of two guide rods made of special bearing steel, equipped with linear bearing or bronze bearing guide, and has high torsion resistance and lateral load resistance. This design makes the cylinder suitable for use in situations where push action is required, or where high precision and load capacity are required.In addition, the working medium of the TCL/TCM series cylinder is air, which needs to be filtered by a 40 micron filter.

1. Compact structure: the gas-liquid damping cylinder has compact structure and small size, which is suitable for the increasingly miniaturized main machine supporting needs and easy to install.2. Easy maintenance: the filter is designed with semi-automatic water discharge device, which can automatically drain sewage when the host stops gas, and can also be manually drained. The pressure reducing valve is sensitive and stable.3.

4HV series Hand lever valve(4/2 way, 4/3 way)  product details1. Large flow rate and small pressure loss;2. A variety of installation structure, easy installation;3. A variety of models are available;4. Pay attention to the direction of gas flow and whether the tooth shape is correct during installation, and the medium used needs to be filtered through a 40μm filter element;5. The gas flow direction P is the intake air, A, (B) is the working port, and R and (S) are the exhaust port;6.

AF Series Filter  Preparation unit product detailsAF series filter preparation device features: improved workability, filter element and cup cover integration, easy to replace filter element; Reduced maintenance space by up to 46%; Improved visibility and safety with a transparent, fully enclosed cup protective cover.AF Series Filter  Preparation unit interior structure No.ItemMaterial1Drain bowlPC2Umbrella bafflePOM3Filtet coreHDPE4O-ringNBR5Air guiderPOM6BodyAluminun alloy7PistonPOM8SpringStainless steel9Fixed baff|ePOM10Fixing nutPOM11Drain cockPOM AF Series Fi

SAI standard cylinde Product details1. Bore size:32,40,50,63,80 100,125,160,20;2. Adjustable air buffer:With adjustable air buffer on the front and back cover;3. Extruded body with switch groove:With switch groove on the two sides of body,  the counterpart sensor switch type is: CMSE\DMSE;4. Four kinds of cylinder joints:I Knuckle、  Y Knuckle、 Floating Joint、 Universal Join；5. Multi-mounting accessories：LB\FA\FB\CA\CB\CR\FTC\TCM1\TCM2\TC.Standard cylinder——SAl Series interior structure   NO.ItemMaterial 1Rod nutCarbon steellStain

Pneumatic quick insert elbow PL product detailsPneumatic quick insert elbow PL is a common pneumatic joint used for quick connection of gas pipes. This joint is characterized by its design as a right Angle elbow, which allows easy connection of the air pipe to the desired direction.BESTEN offers the APL series and the PL series of gas pipe quick and quick insert bent joints, which conform to the M5 mouth and are available in a variety of models such as APL4-M5, APL6-M5, etc.

Preparation unit——GFR Series  Installation and use1, before use, pay attention to check whether the components are damaged during transportation, and then install and use;2, please pay attention to the gas flow direction (pay attention to "→" direction) and nozzle tooth type is correct;3, please pay attention to whether the installation conditions meet the technical requirements (such as "working pressure", "use temperature range");4, please pay attention to the use of media or installation environment, try to avoid fluorine, carbon compounds, aromatic compou

Accessories——Speed controllers(Stainless steel)SL series 1.The sealant being coated on threaded portion can ensure no leakage of thethreaded connection part.2.The inserting direction of universal speed controller can be adjusted in 360°Accessories——Speed controllers(Stainless steel)SL series  External specification  Modelltem[Note1]φDRφPAφPBLCKEAEBHWeight(g)maxminSL4M5□4M5×0.89103.53027.514199.586SL401□1/8＂9147.541.5351420.5151115.5SL6M5□6M5x0.812.5103.53027.516.523.511.587.5SL601□1/8＂12.5147.541.53516.52315.51116.5SL602□1/4＂12.5181047.54116.525181430SL603□3/8＂12.522.51152.

One-touch fittings—tube-tube tvp-PU series Product detailsThe product has the advantages of high universality of parts, good performance, safety and reliability, variety and specifications, and is widely used in petroleum, chemical industry, power station and other industrial sectors.One-touch fittings—tube-tube tvp-PU series External specification Model/ItemφDφPKAWeight(gPU4491429.51.7PU6612.516.53436PU881518538.55PU10101821438.1PU121221234712

One-touch fittings—tube-tube type-PE series product detailsPE series straight pipe is a common pipe connection fittings, mainly used to transfer the fluid medium in the pipe directly from one pipe to another pipe. BESTEN is one of the leading brands on the market offering PE series straight-through tubes. Such products can be selected according to different specifications and models to meet the needs of various working conditions.