HFD manual fingers-manufacture,factory,supplier from China

product detail：BESTEN's HFD series pneumatic fingers are a thin design with a large span and moment load capacity. Its action mode is double action type, through the double piston drive can double output, so as to obtain a larger clamping force.

 3H/4H Manual Valve interior structure1. Manual operation, clean operation, correct and dependable positioning;2. Sliding column structure, suitable sealing and touchy response;3. The internal gap adopts distinct processing technology, which has low friction resistance, low beginning air stress and long carrier life;4. Panel set up function, effortless installation;5. A range of fashions are available;6.

 3R/4R Manual Valve 1. When installing, pay attention to whether the gas flow direction and the nozzle tooth shape are correct, and the use of media needs to be filtered through a 40μm filter element;2. The gas flow direction P is the intake air, A, (B) is the working port, and R and (S) are the exhaust port;3.

product details1.Afiliated manual devices are equipped to facilitate installation and debugging.2.Several standard voltage grades are optional.3.Integrate with the manifold to save installation space.3V100 series solenoid valve interior structure No.ItemNoItemNo.Item1Fixed plate8O-ring15Piston2Manual override9Body16Pilol screw3Override spring10Spool spring17O-ring4Piston O-ring11Bottom  covergasket18Armature5Pilot body12Bottom cover19Coil6Spool packing13Screw20Coil nut7Spool14Wear ring21Connector3V100 series solenoid valve external characteristic  

3V200 series solenoid valve product details1.Afiliated manual devices are equipped to facilitate installation and debugging.2.Several standard voltage grades are optional.3.Integrate with the manifold to save installation space.3V200 series solenoid valve interior structureNo.ItemNo.ItemNo.Item1Fixed plate8O-ring15Piston2Manual override9Body16Pilot screw3Override spring10Spool spring17O-ring4Piston O-ring11Bottom covergasket18Armature5Pilot body12Bottom cover19Coil6Spool packing13Screw20Coil nut7Spool14Wear ring21Connector3V200 series solenoid valve external characteristic ltem\Model

4V400 series solenoid valve product details1.No need to add oil for lubrication.2.It is available to form integrated valve group with the base to save installation space.3.Afiliated manual devices are equipped to facilitate installation and debugging.4.Several standard voltage grades are optional.4V400 series solenoid valve interior structureNo.ItemNo.ItemNo.temNo.ItemNo.|temNo.|temNo.ItemNo.ItemNo   temNo.ItemNo.  Item1Connector3Coil5Fixedplate7Pilot kit9Wearring11Fixedscrew13Bottom  covergasket15Spool17Overridespring19Springnolder21  Side &nb

product details3R series push-pull valve is a hand-pulled valve, with manual operation, direction and shaft core coaxial characteristics, easy to operate and accurate and reliable positioning. This kind of valve adopts the sliding column structure, good sealing, small size, light weight, very convenient installation and disassembly. The inner hole is processed by special technology, which reduces the friction resistance and prolongs the service life of the product. In addition, it does not require oil lubrication and can be installed in multiple positions.

product details1. The inner hole adopts special processing technology, which has low friction resistance, low starting air pressure and long service life;2. Equipped with manual device, easy to install and debug;3. The valve body and valve seat can be used in multiple valves to save space;4. A variety of standard voltage levels are available;5. When installing, pay attention to whether the gas flow direction and the nozzle tooth shape are correct, and the use of media needs to be filtered through a 40μm filter element;6.

4M series Solenoid valve(5/2 way) product details1. Equipped with manual device, easy to install and debug;2. A variety of standard voltage levels are available;3. When installing, pay attention to whether the gas flow direction and the nozzle tooth shape are correct, and the use of media needs to be filtered through a 40μm filter element;4. The gas flow direction P is the intake air, A, (B) is the working port, and R and (S) are the exhaust port;5.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

product details1.Mounting accessories are the same as SC series.2.The seal material with high temperature resistance is adopted to guarantee the normaloperation of cylinder at 150°℃.Standard cylinder——SAI Series  Inner structure  NO.ltemMaterial 1Rod nutCarbon steel\Stainless steel 2Piston rodCarbon steel with 20μm chrome platedor Stainless steel 3Front cover packingTPU 4Front coverAluminum alloy 5BushingWear resistant material 6Cushing O-ringTPU 7BarrelAluminum alloy 8O-ringNBR 9PistonAluminum alloy 10Piston SealNBR 11

Cylinder auxiliary LB tripod  product detailsThe pneumatic auxiliary LB tripod is an accessory of the cylinder, which is mainly used to fix the cylinder and prevent it from moving due to force. The tripod is available in various specifications and models, such as LB-32, LB-40, LB-50, LB-63, LB-80, LB-100, LB-125, LB-160, and LB-200.

Pneumatic accessories PZB series External specification Model\itemφD RLAEC中PKφJJBJCHWeight(gPZB60161/8＂7.539.527.547.512.56.53.28161215.2PZB6021/4＂1030.550.51420.4PZB6033/8＂1132521727PZB80181/8＂7.54630.553.5158.54.39.5191420.9PZB8021/4＂1033561423.8PZB8033/8＂1134.557.51729.9PZB8041/2＂1438.561.52143.5PZB1002101/4＂1052.536.56318214.311221733.5PZB10033/8＂1137.5641736.5PZB10041/2＂1441.5682149.2PZB1203123/8＂1159.5427221234.313262156.5PZB12041/2＂1445752165.4

product detailsThe PL series is a series of pneumatic accessories, including gas pipe fittings, quick threaded elbows, quick connecting cylinders, etc. These accessories are quick to install and easy to use, and are suitable for a wide variety of pneumatic equipment and systems. For example, the PL series has L-threaded two-way pipe joint PL802, which is usually used to connect pneumatic hoses, and its design structure can effectively prevent the hose from falling off and ensure the stable flow of gas.

Aluminum-plastic pipe knowledge (must see before shooting, so as not to shoot wrong)1,4 points: The aluminum plastic pipe of 1216(commonly known as 16) is connected with the aluminum plastic pipe with an inner diameter of 12mm and an outer diameter of 16mm2,6 points: The aluminum plastic pipe of 1620(commonly known as 20) is connected with an aluminum plastic pipe with an inner diameter of 16m and an outer diameter of 20mm3,1 inch: 2025(commonly known as 25) aluminum-plastic pipe fittings are connected with an inner diameter of 20mm and an outer diameter of 25m aluminum-plastic pipe4,1 inch an

MA Mini Cylinder Product detailsNo lubrication: The use of oil powder untreated copper as the shaft bearing, so that the piston rod does not need to lubricate.Durability: The cylinder body and front and back covers are oxidized by color EP coating, which not only has wear resistance, corrosion resistance and durability, but also shows a small and exquisite appearance.High temperature resistance: the cylinder adopts high temperature sealing material, so that the cylinder can work normally under high temperature conditions of 150 degrees Celsius (customers need to order from the company).MA

Accessories Speed controllers(Stainless steel)PA series1.Anti-drop structure is designed on the regulating rod,2.The sealant being coated on threaded portion can ensure no leakage of thethreaded connection part.3.The inserting direction of universal speed controller can be adjusted in 360° Accessories  Speed controllers(Stainless steel)PA series interior structure NO.NameMaterialNO.NameMaterialNO.NameMaterial1Adjusting capAluminum alloy7HolderPBT13O-ringNBR2Lockinc capAluminum alloy8O-ringNBR14Locating seatPOM3Throttling columnSUS3049Throttling sleeveAluminum alloy15Spring gaske

Accessories Silencers PAL series Product detailsAn aluminum foam muffler comprises an outer cylinder, an intake pipe with exhaust holes, an exhaust pipe and a front and rear end cover. An aluminum foam disk with a through hole is arranged parallel between the outer cylinder, the intake pipe and the rear end cover to separate the space into a plurality of chambers. Each aluminum foam disk is provided with a round large hole and its periphery is closely connected with the inner wall of the outer cylinder.

Hexagon socket bolt specifications1) The hexagonal opening allows the pin to be rounded or countersunk2) The end chamfer d<=M4 is the rolled end3) Length of incomplete thread U<=2P4) The top edge of the head can be rounded or chamfered, at the choice of the manufacturer5) The bottom edge can be round or chamfered to Dw, but there must be no burrs6) Inner six bolt standard: GB/T2672, GB/T2673, GB/T2674, GB/T6190 and GB/T6191Hex socket plug Product Parameterproduct nameHex socket plugproduct materialnickle plated ironWithstand voltage range0-1.6Mpa· PRODUCT ROLE Closed redun

In modern industrial production, the application of automation equipment is more and more extensive, and the cylinder as an important part of it, its performance and stability directly affect the efficiency and quality of the entire production process. Among them, ESC cylinder with its excellent performance and reliable quality, won the majority of users praise.

SC series cylinders Product details1. Choose high-temperature sealing materials to ensure that the cylinder works normally under 150°C conditions;2. When the load changes during work, a cylinder with sufficient output force should be selected;3. The dirt should be cleaned before the cylinder is connected to the pipeline, and the medium used should be filtered by a filter element of more than 40μm to prevent debris from entering the cylinder;4.

1. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position loading;2. It has certain anti-flexural and torsional properties, and can withstand certain lateral loads;3. In addition to the axial direction, the rest of the body has installation holes, providing customers with a variety of installation and fixing methods;4. There are two groups of inlet and exhaust ports on both sides of the cylinder for actual needs.5. The anti-collision pad at the front end of the body can adjust the cylinder stroke and alleviate the impact;6.

1.lifetimeThe cylinder life data is obtained under the following experimental conditions of our company.Not a guaranteed life value under your conditions of use.Magnetic coupling rodless cylinder /CYMechanically engaged rodless cylinder /MYtraveled distance3500km3000kmCylinder condition  Action status: GoodExternal leakage: less than 1cc/minInternal leak: less than 1cc/minAppearance: Lubricated state is good, no damageMinimum operating pressure: same as the initial valueAction status: GoodDustproof sealing belt: no detachment, dislocation, or crackAir leakage: same as initial valueMi

Cutting machine positioning cylinder  Product details1, why install the cylinder: Before the cutting machine starts to work, we need to locate the origin of the workpiece to be processed. If there is no positioning cylinder, we need to adjust the positioning of each plate repeatedly to ensure the precision and accuracy of the processing.