Gas pressure reducer-manufacture,factory,supplier from China

(Total 24 Products for Gas pressure reducer)
1. Gas-liquid converters can be used to obtain higher pressure and strength where greater output is required. 2. An oil cylinder, also known as a hydraulic cylinder or hydraulic cylinder, is an executive element in a hydraulic system that generates linear motion or force through the pressure of the liquid. The cylinder is usually used in conjunction with the gas-liquid supercharger.
  Contact Now
Explosion-proof PU gas pipe product detailsIts oil resistance is better, it is about fifteen to twenty times the oil resistance of natural rubber. Another is that its wear resistance is relatively good, it is more than thirty to fifty times the abrasive property of natural rubber, so we can not underestimate it. In addition, its aging resistance is also relatively good, it is about five times the aging performance of natural rubber, which is not available to other materials.
  Contact Now
Pressure reducing valve AR seriesAR series pressure reducing valve has a variety of models, users can choose according to the need to have a pressure gauge or reverse flow function of the pressure reducing valve. These regulators are durable and can be used in harsh conditions. In addition, they have locking adjustment knobs that prevent Settings from being accidentally changed, providing great convenience.
  Contact Now
Product detailsAR2000 series pressure reducing valve is an important pneumatic equipment, mainly used to adjust and regulate the pressure of the air source. This kind of equipment has the functions of decompression and pressure regulation, and is widely used in various pneumatic equipment and systems. The nozzle diameter is less than 1/2 inch and the pressure rating is 1-2Mpa.
  Contact Now
1. Save installation space: The dual-shaft cylinder design can parallel two single-rod thin cylinders, which can save installation space and provide greater output.2. Anti-bending and anti-torsional performance: some cylinder design with pressure head can withstand a certain side load, improving the reliability of the equipment.3. Easy installation: Part of the cylinder design with pressure head allows to be fixed from four directions, providing users with more installation options.4.
  Contact Now
Preparation unit——GFR Series  Installation and use1, before use, pay attention to check whether the components are damaged during transportation, and then install and use;2, please pay attention to the gas flow direction (pay attention to "→" direction) and nozzle tooth type is correct;3, please pay attention to whether the installation conditions meet the technical requirements (such as "working pressure", "use temperature range");4, please pay attention to the use of media or installation environment, try to avoid fluorine, carbon compounds, aromatic compou
  Contact Now
BFR Two-piece oil-water separator Product Parameter1. Maximum operating pressure: 1.0Mpa(145Psi)2.Guarantee pressure resistance: 1.5Mpa(215Psi)3. Filter cup capacity: 60cc4.
  Contact Now
1. Compact structure: the gas-liquid damping cylinder has compact structure and small size, which is suitable for the increasingly miniaturized main machine supporting needs and easy to install.2. Easy maintenance: the filter is designed with semi-automatic water discharge device, which can automatically drain sewage when the host stops gas, and can also be manually drained. The pressure reducing valve is sensitive and stable.3.
  Contact Now
4HV series Hand lever valve(4/2 way, 4/3 way)  product details1. Large flow rate and small pressure loss;2. A variety of installation structure, easy installation;3. A variety of models are available;4. Pay attention to the direction of gas flow and whether the tooth shape is correct during installation, and the medium used needs to be filtered through a 40μm filter element;5. The gas flow direction P is the intake air, A, (B) is the working port, and R and (S) are the exhaust port;6.
  Contact Now
BESTEN manipulator side cylinder product detailsA cylindrical metal component that guides the piston in a straight line through the cylinder. The air in the engine cylinder expands, converting heat energy into mechanical energy; The gas in the compressor cylinder is compressed by the piston, and the pressure increases. The outer casing of a turbine, rotary piston engine, etc., is also commonly referred to as a "cylinder".
  Contact Now
PC quick plug straight through How to choose the model thread size Better understanding of PC-G straight joint, thread size/nozzle size, save shopping time, just compare the size of the original PC-G straight thread to choose the joint you need.   PC quick plug straight through  Product Advantages1,Arbitrary rotation, flexible tube distribution: the gas pipe can also be rotated 360 degrees after installation, which can meet the needs of tube distribution in different occasions2, Selected material, not easy to trip: the use of iron nickel plated material, rust resi
  Contact Now
 3R/4R Manual Valve 1. When installing, pay attention to whether the gas flow direction and the nozzle tooth shape are correct, and the use of media needs to be filtered through a 40μm filter element;2. The gas flow direction P is the intake air, A, (B) is the working port, and R and (S) are the exhaust port;3.
  Contact Now
product details1. The inner hole adopts special processing technology, which has low friction resistance, low starting air pressure and long service life;2. Equipped with manual device, easy to install and debug;3. The valve body and valve seat can be used in multiple valves to save space;4. A variety of standard voltage levels are available;5. When installing, pay attention to whether the gas flow direction and the nozzle tooth shape are correct, and the use of media needs to be filtered through a 40μm filter element;6.
  Contact Now
Pneumatic quick insert elbow PL product detailsPneumatic quick insert elbow PL is a common pneumatic joint used for quick connection of gas pipes. This joint is characterized by its design as a right Angle elbow, which allows easy connection of the air pipe to the desired direction.BESTEN offers the APL series and the PL series of gas pipe quick and quick insert bent joints, which conform to the M5 mouth and are available in a variety of models such as APL4-M5, APL6-M5, etc.
  Contact Now
Product details3A100 series air control valve, also known as three-way two-position air control valve, adopts sliding column structure to ensure good sealing performance and sensitive response. The dual-head gas-controlled portion of the valve has a memory function, that is, it can remain in its original state after a power failure or loss of air pressure. The inner hole is processed by special technology, with low friction resistance, low starting pressure and long service life. In addition, no lubrication is required and maintenance is easy.
  Contact Now
PC thread through Product details1, widely used: products are widely used in machinery and equipment, textile equipment, medical equipment, food processing and other fields2, the quick joint is not suitable for what kind of environment: do not use for electrostatic sensitive occasions, will cause poor system failure, do not use for spark occasions, will cause fire hazards, do not use in cutting oil, lubricating oil and cooling liquid direct contact environmentPC thread through Product ParameternameThreaded straight jointmodelPCMaximum pressure resistance1.5Mpathe pressure range of use1~1.
  Contact Now
A cylindrical metal component that guides the piston through linear reciprocating motion in the cylinder. Air expands in the engine cylinders to produce heat.To mechanical energy; The gas is compressed by a piston in the compressor cylinder to increase the pressure. Turbine, rotary piston engineShells, etc., are also commonly referred to as "cylinders". Applications: printing (tension control), semiconductor (spot welding machine, chip grinding), automatic control, robotics, etc.Stainless steel mini standard cylinder construction1.
  Contact Now
Basic parameterscylinder bore(mm)32 40 506380100 125manner of execution QGDXworking mediumairAIR PRESSURE 0.1~1.0mpafixed formRod side flange plate fixedoperating temperature-10~70°℃(Freeze Unselected)Buffer formadjustable cushion Connection diameter  PT1/8PT1/4PT3/8PT1/2product standardCylinder diameter \ symbol  ACBB BC BDBEBF BPIS T321409310 48 337258 71745 33401429310 53 378570 71750 37501509310 65 4710386 92362 47631539612 75 5611798 92375 5
  Contact Now
product detailsVacuum generator is an advanced pneumatic component, its main function is to use positive pressure source to produce negative pressure. The device is relatively simple in structure, small in size and light in weight, easy to install and does not require additional maintenance. It is through the flow of compressed air to form a certain degree of vacuum, compared with the vacuum pump, the vacuum generator has many advantages, including low cost, high efficiency, clean, economic and miniaturization.
  Contact Now
4M series Solenoid valve(5/2 way) product details1. Equipped with manual device, easy to install and debug;2. A variety of standard voltage levels are available;3. When installing, pay attention to whether the gas flow direction and the nozzle tooth shape are correct, and the use of media needs to be filtered through a 40μm filter element;4. The gas flow direction P is the intake air, A, (B) is the working port, and R and (S) are the exhaust port;5.
  Contact Now
Preparation unit——GL Series product detailsBSTEN's GL series High efficiency compressed air filters contain four filter grades, the Deep Filtration Grade (VL), for the reliable removal of 3μm solid particles, showing 99.95% filtration performance. Its innovative filter element design provides optimal flow characteristics at minimum pressure drop.
  Contact Now
product detailsThe PL series is a series of pneumatic accessories, including gas pipe fittings, quick threaded elbows, quick connecting cylinders, etc. These accessories are quick to install and easy to use, and are suitable for a wide variety of pneumatic equipment and systems. For example, the PL series has L-threaded two-way pipe joint PL802, which is usually used to connect pneumatic hoses, and its design structure can effectively prevent the hose from falling off and ensure the stable flow of gas.
  Contact Now
1.working pressureThe table below shows the minimum operating pressure.  (MPa)缸 筒 内 径     ( m m)61015(16)20253240506380100Magnetic coupling type /CY *0.160.160.160.150.140.12Mechanical joint type /MY——0.20.1(0.15)Below are the maximum operating pressures.Magnetic coupling rodless cylinder: 0.7MPaMechanically engaged rodless cylinder: 0.8MPa※ The minimum operating pressure of the magnetic coupling type is CY3B and CY3R.Below are the maximum operating pressures.Magnetic coupling rodless cylinder: 0.7MPaMechanically engaged rodless cylin
  Contact Now
Quick twist PL bend Product details1,Simple and smart,kinds of models,soit meets any stringing pipe requirements.2, Even ifinstalled.plastic pipe can rotate at random.3, Release ring adopts ellipse design,so removing for it is m ore convenient.4, All taper pipe threads paints Teflon leakage-proofrubber,so seal property is good.5, AIl PC type directly connects hexagonal socket hole of grading belt,so itis convenientto install in the narrow.Quick twist PL bend   product standard FluidClean compressed air,vacuumMax.working pressure1.32Mpa(13.5kgf/cm²)Pressure rangeNormal
  Contact Now
Relate News
In modern industrial society, the efficient use and management of energy is an important cornerstone to support production and daily life. Gas-liquid converters, often in the form of oil tanks, play a crucial role in this process. They are not only physical containers for the storage of oil and its products, but also key nodes for energy flow and security.
 The biggest advantage of an indenter cylinder is its efficient working performance. Like an experienced old craftsman, the cylinder with the pressure head can complete complex actions in the shortest time. This is because it uses advanced pressure sealing technology, which can quickly establish the required working pressure at the moment the cylinder is started, thus achieving a fast response.
Rodless cylinder installation method and precautionscautionMagnetically coupled rodless cylinderWhen the load is stopped halfway with an external stopper, the use pressure can not exceed about 0.55MPa, and once the use pressure exceeds the limit value, the magnetic coupling has the possibility of separation.When the load is stopped in the middle of the stroke with a pneumatic circuit, once the kinetic energy exceeds the allowable value, the magnetic coupling has the possibility of separation.The slide block of the standard magnetically coupled rodless cylinder can rotate, and an external guide
TN series cylinders, with its unique design concept and sophisticated manufacturing process, have won wide recognition in the industry. Its core advantages are efficient working ability and stable operating performance. This series of cylinders uses advanced sealing technology to ensure reliability under extreme operating conditions, whether it is high temperature, high pressure or corrosive environment, TN series cylinders can maintain their original performance. In terms of structural design, TN series cylinders show a high degree of science.
 Solenoid valves play a central role in the operation of cylinders, which directly manage the start, stop and direction of movement of cylinders by controlling the on/off and direction of airflow. First of all, the solenoid valve is able to open or close the air source, thus controlling the start and stop of the cylinder, and it controls the expansion and contraction of the cylinder by changing the flow direction of the gas.
 Damping cylinder, as the name suggests, is a device that uses a liquid or gas medium to generate damping force. Its basic construction consists of a sealed cylinder block and a piston that can be moved within the cylinder block. When the piston moves in the cylinder block, the flow of the medium is limited, which creates resistance, which is the damping force.
A cylindrical metal mechanism that guides the piston to reciprocate in a straight line in the cylinder. Air in the engine cylinders by expansion converts thermal energy into mechanical energy; The gas is compressed by the piston in the compressor cylinder to increase the pressure.The housings of turbines, rotary piston engines, etc., are often referred to as "cylinders". Application fields of pneumatic cylinders: printing (tension control), semiconductors (spot welding machines, chip grinding), automation control, robotics, etc.①The basic structure of the cylinder1.
The cylinder is one of the commonly used executive components in industrial automation, which is widely used in the transmission and control of various mechanical systems, especially in the fluid power transmission and hydraulic transmission systems. According to the working mode of the cylinder, it can be divided into single acting cylinder and double acting cylinder.
On November 9, 2023, the 12th Asia-Pacific Economic Cooperation (APEC) SME Technology Exchange and Exhibition (hereinafter referred to as APEC Technology Exhibition), co-sponsored by the Ministry of Industry and Information Technology and the People's Government of Shandong Province, opened in Qingdao. This "Technology exhibition" attracted more than 1,000 domestic and foreign enterprises to participate in the exhibition.
In order to further implement the decisions and arrangements of Shandong Provincial Party Committee and provincial government, further promote the integration and innovation of large, small and medium-sized enterprises, and promote the quality and efficiency of key industrial chains, Shandong Provincial Department of Industry and Information Technology held the launching ceremony of Shandong 2024 "Ten Chains, one million groups and Ten Thousand Enterprises" special action of melting and strengthening chains in Jinan on March 21.