ESC100×150-CCT cylinder-manufacture,factory,supplier from China

In modern industrial production, the application of automation equipment is more and more extensive, and the cylinder as an important part of it, its performance and stability directly affect the efficiency and quality of the entire production process. Among them, ESC cylinder with its excellent performance and reliable quality, won the majority of users praise.

product details1 .The back cover has a variety of installation forms, making the installation more convenient;2. A variety of specifications of cylinders and accessories are available for customers to choose3. Select the material of the high-temperature resistant seal, which can ensure the normal operation of the cylinder under the condition of 150 °C;4. When the load changes during work, a cylinder with sufficient output force should be selected;5.

CDU Series multi-seat cylinder product details1. Use high temperature resistant sealing material,The operating temperature ranges from 0 to 150°C. (Option).2. There are six apertures available: apertures: 6,10,16,20,25,323.6 direction installation: the cylinder can be installed from 6 directions, easy to install and use: front, rear, left, right, bottom installation, top4. There are magnetic switch slots around the cylinder block: there are magnetic switch slots around the cylinder block to facilitate the installation of induction switches.5.

1. A variety of installation forms on the back cover make the installation more convenient;2. The selection of high-temperature seal material can ensure the normal operation of the cylinder under the condition of 150°C;3. The medium used in the cylinder should be filtered by the filter element above 40μm before it can be used    4. The cylinder should be tested for no-load operation before use, and the buffer should be adjusted to the minimum before operation and gradually relaxed, so as to avoid excessive impact and damage to the cylinder;5.

SC series cylinders Product details1. Choose high-temperature sealing materials to ensure that the cylinder works normally under 150°C conditions;2. When the load changes during work, a cylinder with sufficient output force should be selected;3. The dirt should be cleaned before the cylinder is connected to the pipeline, and the medium used should be filtered by a filter element of more than 40μm to prevent debris from entering the cylinder;4.

1. A variety of installation forms on the back cover make the installation more convenient;2. A variety of specifications of cylinders and accessories are available for customers to choose;3. The selection of high-temperature seal materials can ensure the normal operation of the cylinder under the condition of 150°C;4. When the load changes during the work, the cylinder with sufficient output force should be selected;5.

SC sequence cylinders Product details1. Choose high-temperature sealing substances to make certain that the cylinder works commonly underneath 150°C conditions;2. When the load adjustments at some point of work, a cylinder with adequate output pressure ought to be selected;3. The grime need to be cleaned earlier than the cylinder is linked to the pipeline, and the medium used need to be filtered by using a filter aspect of greater than 40μm to stop particles from coming into the cylinder;4.

MA Mini Cylinder Product detailsNo lubrication: The use of oil powder untreated copper as the shaft bearing, so that the piston rod does not need to lubricate.Durability: The cylinder body and front and back covers are oxidized by color EP coating, which not only has wear resistance, corrosion resistance and durability, but also shows a small and exquisite appearance.High temperature resistance: the cylinder adopts high temperature sealing material, so that the cylinder can work normally under high temperature conditions of 150 degrees Celsius (customers need to order from the company).MA

Standard cylinder SAU Series  product details1.Mounting accessories are the same as SC series.2.The seal material with high temperature resistance is adopted to guarantee the normaloperation of cylinder at 150°℃.Standard cylinder——SAU Series  Inner structure  NO.ltemMaterial 1Rod nutCarbon steel 2Piston rodCarbon steel with 20μm chrome plated 3Front cover packingTPU 4BushingWear resistant material 5Front coverAluminum alloy 6Cushing O-ringNBR 7Cushion gasketTPU 8BarreAluminum alloy 9PistonAluminum alloy 10Piston ro

Standard cylinder SAU Series product details1.Mounting add-ons are the equal as SC series.2.The seal fabric with high temperature resistance is adopted to assurance the normaloperation of cylinder at 150°℃.Standard cylinder——SAU Series  Inner structure  NO.ltemMaterial 1Rod nutCarbon steel 2Piston rodCarbon steel with 20μm chrome plated 3Front cover packingTPU 4BushingWear resistant material 5Front coverAluminum alloy 6Cushing O-ringNBR 7Cushion gasketTPU 8BarreAluminum alloy 9PistonAluminum alloy 10Piston rod O-ringNBR

product details1.Mounting accessories are the same as SC series.2.The seal material with high temperature resistance is adopted to guarantee the normaloperation of cylinder at 150°℃.Standard cylinder——SAI Series  Inner structure  NO.ltemMaterial 1Rod nutCarbon steel\Stainless steel 2Piston rodCarbon steel with 20μm chrome platedor Stainless steel 3Front cover packingTPU 4Front coverAluminum alloy 5BushingWear resistant material 6Cushing O-ringTPU 7BarrelAluminum alloy 8O-ringNBR 9PistonAluminum alloy 10Piston SealNBR 11

product details1.The thin cylinder occupies less space, has light structure, beautiful appearance, and can bear large transverse load.

Cutting machine positioning cylinder  Product details1, why install the cylinder: Before the cutting machine starts to work, we need to locate the origin of the workpiece to be processed. If there is no positioning cylinder, we need to adjust the positioning of each plate repeatedly to ensure the precision and accuracy of the processing.

BESTEN manipulator side cylinder product detailsA cylindrical metal component that guides the piston in a straight line through the cylinder. The air in the engine cylinder expands, converting heat energy into mechanical energy; The gas in the compressor cylinder is compressed by the piston, and the pressure increases. The outer casing of a turbine, rotary piston engine, etc., is also commonly referred to as a "cylinder".

1. Gas-liquid converters can be used to obtain higher pressure and strength where greater output is required. 2. An oil cylinder, also known as a hydraulic cylinder or hydraulic cylinder, is an executive element in a hydraulic system that generates linear motion or force through the pressure of the liquid. The cylinder is usually used in conjunction with the gas-liquid supercharger.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

product details1. The flow control valve on the hydraulic brake cylinder can adjust the speed of the piston rod. Brake cylinders with built-in jump valves and brake valves can be supplied according to customer requirements to realize their jump and stop functions.When the oil in the tank reaches a small scale, it is necessary to replenish it, please use No. 40 oil and the corresponding pump.2. It is suitable for occasions that require the cylinder to move slowly and evenly.3.

1. Anti-bending and anti-torsional performance: dual-shaft cylinders and other types can withstand a certain side load, with good stability and durability.2. Adjustable stroke: the front end of some diagonal pressure cylinders can adjust the cylinder stroke, and alleviate the impact, making the output greater.Application area1. Automation equipment: In the automated production line, the baroclinic cylinder is used to accurately control the mechanical movement, improve production efficiency and product quality.2.

Three axis adjustable cylinder product details1. The cylinder with a information rod is composed of two information rods parallel to the piston and the cylinder.2.

QTH hinge press cylinder Product details1. Surface anti-oxidation coating treatment, long use time2. High hardness spring, corrosion and rust, stable and durable, low density3. Smooth piston rod, smooth operation, fine processing, smooth grinding, smooth operation, small stroke error4. Nylon presser foot: wear resistance, anti-slip, fine workmanship, smooth surface, non-slip process, uniform force when pressing material, smooth pressing material is not easy to slip, careful material selection, high product stability, long use time5.

Baroclinic cylinder product details1, exquisite technology, a variety of specifications optional: reliable quality, advanced technology, to provide a variety of specifications for choice.2, through the ISO international system three certification, to ensure product quality and reliability.3, the factory has advanced robot automatic production line, precision processing, improve production efficiency and product quality.Baroclinic cylinder External specification      

1.lifetimeThe cylinder life data is obtained under the following experimental conditions of our company.Not a guaranteed life value under your conditions of use.Magnetic coupling rodless cylinder /CYMechanically engaged rodless cylinder /MYtraveled distance3500km3000kmCylinder condition  Action status: GoodExternal leakage: less than 1cc/minInternal leak: less than 1cc/minAppearance: Lubricated state is good, no damageMinimum operating pressure: same as the initial valueAction status: GoodDustproof sealing belt: no detachment, dislocation, or crackAir leakage: same as initial valueMi

1. Save installation space: The dual-shaft cylinder design can parallel two single-rod thin cylinders, which can save installation space and provide greater output.2. Anti-bending and anti-torsional performance: some cylinder design with pressure head can withstand a certain side load, improving the reliability of the equipment.3. Easy installation: Part of the cylinder design with pressure head allows to be fixed from four directions, providing users with more installation options.4.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take necessary protective measures;4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.