Cylinders for fixtures and test equipment-manufacture,factory,supplier from China

Door and window equipment clamp  product detailsThe clamping device of an aluminum alloy door and window comprises a base and also comprises a clamping part, the clamping part comprises a clamping head A, a clamping head b, two clamping heads are relatively arranged, the clamping head b and the base are connected, the clamping head A is connected through a moving part and the base, the moving part comprises a main rod, a threaded sleeve, and the clamping head is connected with the base.

1: Automotive industry applications - Engine test lineTo move the engine from the load bench to the test bench, rodless cylinders must be used for easy maintenance due to limited space, which greatly saves labor and improves efficiency.2: Classic product application - handling on the production lineThe rodless cylinder changes the direction of product movement, which is very labor-saving, high production efficiency, easy installation and low cost.

1. Mechanical equipment: food machinery, medical machinery, welding machinery, packaging equipment and other fields. 2. Entertainment industry: dynamic seats, multi-freedom dynamic platform, simulation and other fields. 3. Automotive industry: press machine, fatigue test and other fields. 4.

1. Application: rodless cylinder is suitable for the need to save space and the sealing performance requirements are not particularly high occasions. When selecting rodless cylinders, factors such as load, stroke, speed and environmental conditions in practical applications need to be considered.2. Load capacity: Rodless cylinders typically have a smaller load capacity because they lack the piston rods in traditional roded cylinders to provide additional support and force transfer.

1. By extending the multi-stage piston sequentially, it can achieve a long stroke in a relatively short installation length, which is suitable for equipment with limited space but long stroke.2. The compression area of the piston at all levels is different, the output force is larger when the initial extension is large, and the output force gradually decreases with the increase of the number of stages, but it can provide greater thrust than the single-stage cylinder in general.3.

PC thread through Product details1, widely used: products are widely used in machinery and equipment, textile equipment, medical equipment, food processing and other fields2, the quick joint is not suitable for what kind of environment: do not use for electrostatic sensitive occasions, will cause poor system failure, do not use for spark occasions, will cause fire hazards, do not use in cutting oil, lubricating oil and cooling liquid direct contact environmentPC thread through Product ParameternameThreaded straight jointmodelPCMaximum pressure resistance1.5Mpathe pressure range of use1～1.

CV vacuum generator External specification1, rapid response: rapid vacuum reaction, high vacuum, large vacuum flow and stable performance2, suitable for a variety of environments: widely used in medical equipment, automotive industry, textile industry, printing industry and other fieldsCV vacuum generator External specification    Model ABC DE FGHol K MLPVSpecial muffler models available  Cv-05□ 83216 10G1/8 14204.54.2 10 1455G1/8G1/8  MSS-01CV-10□CV-15□ 103520 11G1/4 2025545  15 

1. Manufacturer: Shandong Baedi Pneumatic is a professional manufacturer of MAL aluminum alloy mini cylinder, providing a comprehensive selection of aluminum alloy mini cylinder products, as well as fast pre-sales and after-sales service to ensure customer convenience and safety.2. Application range: Due to its miniature size and high performance, MAL series cylinders are suitable for space-constrained applications such as precision equipment, small robotic arms, etc., where precisely controlled pneumatic actions are required. 3.

product detailsAC oil-water separation filter It works by using natural filtration and gravity to break down oil and water and treat wastewater into a form that can be safely discharged. This equipment is widely used in a wide range of industries, such as mining, construction, food processing, as well as specific environmental areas such as catering oil and water separation and industrial oil and water separation.In terms of its specific working process, for example, condensate water enters the oil-water separator through the inlet connection.

Magnetic coupled rodless cylinderRMS series rodless cylinders are magnetically coupled rodless cylinders. The cylinder is unique in that there is no mechanical connection between the piston and the slider, which makes its sealing performance excellent. In addition, the action of the piston is transmitted to the external slide by magnetic coupling force, without the need for a piston rod.

Aluminum block for heavy duty sucker fittings Usage method1. Connect the drain valve, drain tube and suction pad respectively.2.

1. A variety of installation forms on the back cover make the installation more convenient;2. A variety of specifications of cylinders and accessories are available for customers to choose;3. The selection of high-temperature seal materials can ensure the normal operation of the cylinder under the condition of 150°C;4. When the load changes during the work, the cylinder with sufficient output force should be selected;5.

product detailsCylinder fisheye joint is a special cylinder connection attachment, mainly used to connect the cylinder with other equipment or components. This joint is characterized by a fisheye shape at one end, which allows easy docking with the interface of other equipment, while the other end is connected with the cylinder. By using different types of cylinder fisheye joints, fast, reliable and flexible connections between cylinders and other equipment can be achieved.

SC sequence cylinders Product details1. Choose high-temperature sealing substances to make certain that the cylinder works commonly underneath 150°C conditions;2. When the load adjustments at some point of work, a cylinder with adequate output pressure ought to be selected;3. The grime need to be cleaned earlier than the cylinder is linked to the pipeline, and the medium used need to be filtered by using a filter aspect of greater than 40μm to stop particles from coming into the cylinder;4.

Open and close type gear air claw Product detailsA parallel opening and closing air claw comprises a cylinder block and a claw block for diffusion and polymerization movement relative to the cylinder block at one end of the cylinder block, characterized in that: The parallel opening and closing air claw comprises a piston, one end of the piston is provided with a concave part of the concave table, the bottom of the concave part is provided with a first ring buffer pad, the upper end of the cylinder body is provided with the concave part of the concave table shaped convex part.Open and clo

1. Anti-bending and anti-torsional performance: dual-shaft cylinders and other types can withstand a certain side load, with good stability and durability.2. Adjustable stroke: the front end of some diagonal pressure cylinders can adjust the cylinder stroke, and alleviate the impact, making the output greater.Application area1. Automation equipment: In the automated production line, the baroclinic cylinder is used to accurately control the mechanical movement, improve production efficiency and product quality.2.

1. Preliminary consultation: You only need to tell us the key parameters of the equipment, such as effective travel, speed, accuracy, load, etc.2. Scheme design: Engineers design the corresponding drawings according to the parameters you provide, and give detailed quotation schemes according to the products you choose.

1. Connection method: The front and rear cover and stainless steel cylinder are riveted roller package structure, which is reliable and stable. 2. Material advantage: The cylinder adopts high-precision stainless steel pipe, which has high strength and good corrosion resistance, suitable for long-term operation in harsh working environment. 3. Size advantage: Compared with ISO6432 standard cylinders of the same bore and stroke, MF series cylinders are smaller in length, suitable for space-constrained applications. 4.

Rodless cylinder product detailsRodless cylinders are mainly divided into magnetic coupling rodless cylinders and mechanical rodless cylinders. In a magnetically coupled rodless cylinder, the action of the piston is transmitted to the external slide through the magnetic coupling force, without the need for a piston rod. Because there is no mechanical connection between the piston and the slider, its sealing performance is excellent.

product detailsThe PL series is a series of pneumatic accessories, including gas pipe fittings, quick threaded elbows, quick connecting cylinders, etc. These accessories are quick to install and easy to use, and are suitable for a wide variety of pneumatic equipment and systems. For example, the PL series has L-threaded two-way pipe joint PL802, which is usually used to connect pneumatic hoses, and its design structure can effectively prevent the hose from falling off and ensure the stable flow of gas.

1, dedicated to hinge drilling cylinder2, with grooves with oil storage function, high efficiency and energy saving, excellent performance3, the use of safety, manufacturers direct sales quality assurance4, fine workmanship, stronger impact, high strength piston rod5, smooth sliding, cylinder body full hard oxidation treatmentSCJ standard cylinder  external reference spec Bore size\ltemA(SCD)A(SCJ)ABACDADBEFA3218718247933227M10X1.2564019118549933428M12X1.2575020719457934229M16X1.586321019757964229M16X1.5880257238.5751075435.5M20X1.510100263244.5751135435.5M20X1.510Remark:1.

1. Save installation space: The dual-shaft cylinder design can parallel two single-rod thin cylinders, which can save installation space and provide greater output.2. Anti-bending and anti-torsional performance: some cylinder design with pressure head can withstand a certain side load, improving the reliability of the equipment.3. Easy installation: Part of the cylinder design with pressure head allows to be fixed from four directions, providing users with more installation options.4.

Product detailsAR2000 series pressure reducing valve is an important pneumatic equipment, mainly used to adjust and regulate the pressure of the air source. This kind of equipment has the functions of decompression and pressure regulation, and is widely used in various pneumatic equipment and systems. The nozzle diameter is less than 1/2 inch and the pressure rating is 1-2Mpa.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.