Cylinder accessory-manufacture,factory,supplier from China

Pneumatic accessory single ear CA product detailsWhen the load and the axis of the piston rod should be uniformly installed in the earring type and trunnion type cylinder, the swing of the cylinder and the swing of the load should be ensured in a plane otherwise, the light seal will be worn, causing air leakage and reducing the service life of the cylinder; Sometimes, the cylinder may have a striking action, which may cause damage to the human body and the device.

Pneumatic accessory Y-fitting product detailsThe Y-joint is a common pneumatic joint used to connect components such as air pipes and cylinders. This joint is characterized by its double "Y" shape design, which can divide a gas pipe into four branch tubes. Therefore, it is very useful in applications where one input signal needs to be shunt to multiple output devices. BESTEN offers a wide range of pneumatic fittings for a wide range of pneumatic applications, available in a wide range of materials and configurations, easy to install and suitable for project requirements.

product details1. Seiko casting: fine grinding does not rust: These accessories after fine grinding treatment, not only to prevent rust, but also to improve its overall quality and performance.2.

Cylinder auxiliary LB tripod  product detailsThe pneumatic auxiliary LB tripod is an accessory of the cylinder, which is mainly used to fix the cylinder and prevent it from moving due to force. The tripod is available in various specifications and models, such as LB-32, LB-40, LB-50, LB-63, LB-80, LB-100, LB-125, LB-160, and LB-200.

1. Multi-position loading: The fixed plate design has three mounting holes, which allows the cylinder to be loaded in multiple positions, improving its applicability.2. Front end anti-collision pad: The anti-collision pad at the front end of the cylinder body can adjust the stroke and alleviate the impact, protecting the cylinder from damage.3. With magnetic type standard configuration: the standard configuration of this series of cylinders is with magnetic type, which helps to use in occasions where magnetic induction is required.

Three axis adjustable cylinder product details1. The cylinder with a information rod is composed of two information rods parallel to the piston and the cylinder.2.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected; 3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

Product characteristicsThe MGPM series three-axis cylinder is a kind of automation element with superior performance and compact design. This type of cylinder is widely used in many fields, from its construction to performance characteristics, showing its efficiency and reliability. The following will explore in depth the multiple aspects of the MGP series three-axis cylinder:1.

product details1.The thin cylinder occupies less space, has light structure, beautiful appearance, and can bear large transverse load.

1.lifetimeThe cylinder life data is obtained under the following experimental conditions of our company.Not a guaranteed life value under your conditions of use.Magnetic coupling rodless cylinder /CYMechanically engaged rodless cylinder /MYtraveled distance3500km3000kmCylinder condition  Action status: GoodExternal leakage: less than 1cc/minInternal leak: less than 1cc/minAppearance: Lubricated state is good, no damageMinimum operating pressure: same as the initial valueAction status: GoodDustproof sealing belt: no detachment, dislocation, or crackAir leakage: same as initial valueMi

In modern industrial production, the application of automation equipment is more and more extensive, and the cylinder as an important part of it, its performance and stability directly affect the efficiency and quality of the entire production process. Among them, ESC cylinder with its excellent performance and reliable quality, won the majority of users praise.

1.the cylinder buffer adjustment is smooth;2.a variety of specifications of the cylinder and cylinder installation accessories for customers to choose to use;3.

ACE Compact cylinder product details1, compact structure: compact structure, effectively save 50% installation space2.

TR two-shaft cylinder installation and use1. When the load changes during the work, the cylinder with sufficient output force should be selected.2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected.3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take appropriate protective measures.4. Before the cylinder is connected to the pipeline, the stolen goods in the pipeline must be removed to prevent debris from entering the cylinder.5.

MG guide rod cylinder product details1.

SC series cylinders Product details1. Choose high-temperature sealing materials to ensure that the cylinder works normally under 150°C conditions;2. When the load changes during work, a cylinder with sufficient output force should be selected;3. The dirt should be cleaned before the cylinder is connected to the pipeline, and the medium used should be filtered by a filter element of more than 40μm to prevent debris from entering the cylinder;4.

1. Reliable structure: cylinder and back cover, piston and piston rod with riveted structure, this design makes the cylinder structure compact and reliable. 2. Surface treatment: The inner diameter of the cylinder is rolled and then subjected to hard oxidation treatment, which improves the durability and corrosion resistance of the cylinder. 3.

product detailsCylinder fisheye joint is a special cylinder connection attachment, mainly used to connect the cylinder with other equipment or components. This joint is characterized by a fisheye shape at one end, which allows easy docking with the interface of other equipment, while the other end is connected with the cylinder. By using different types of cylinder fisheye joints, fast, reliable and flexible connections between cylinders and other equipment can be achieved.

Baroclinic cylinder product details1, exquisite technology, a variety of specifications optional: reliable quality, advanced technology, to provide a variety of specifications for choice.2, through the ISO international system three certification, to ensure product quality and reliability.3, the factory has advanced robot automatic production line, precision processing, improve production efficiency and product quality.Baroclinic cylinder External specification      

1. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position loading;2. It has certain anti-flexural and torsional properties, and can withstand certain lateral loads;3. In addition to the axial direction, the rest of the body has installation holes, providing customers with a variety of installation and fixing methods;4. There are two groups of inlet and exhaust ports on both sides of the cylinder for actual needs.5. The anti-collision pad at the front end of the body can adjust the cylinder stroke and alleviate the impact;6.

Product details: 1.Hard oxidation cylinder: high strength, long service life 2.CNC fine tapping screw: international standard, close connection 3.

1. A variety of installation methods: the central shaft cylinder provides a variety of installation methods, which can be used for blocking, feeding, pushing, stamping, clamping and other occasions, which increases its flexibility and application range.2. Simple speed control: the cylinder is good at reciprocating linear motion, especially suitable for parallel transmission of products and workpieces. By adjusting the one-way throttle valve, the cylinder can simply complete the steady speed control, which is a major feature and advantage of the cylinder drive system software.3.

1. Anti-bending and anti-torsional performance: dual-shaft cylinders and other types can withstand a certain side load, with good stability and durability.2. Adjustable stroke: the front end of some diagonal pressure cylinders can adjust the cylinder stroke, and alleviate the impact, making the output greater.Application area1. Automation equipment: In the automated production line, the baroclinic cylinder is used to accurately control the mechanical movement, improve production efficiency and product quality.2.

1, with the limit switch installation, the electric cylinder position or stroke positioning upper and lower limits, magnetic switch2, high-end custom servo electric cylinder: can be customized 10-5000mm, can provide thrust, stroke, speed and special customization3, low noise and smooth movement: high speed, high precision movement, smooth movement, low noise, unique anti-turning function to ensure high-precision position control and high safety of the equipment4, different installation options: focus on electric cylinder focus on quality products Specifications of productsnameunit170 cyli