The cylinder-manufacture,factory,supplier from China

1. Gas-liquid converters can be used to obtain higher pressure and strength where greater output is required. 2. An oil cylinder, also known as a hydraulic cylinder or hydraulic cylinder, is an executive element in a hydraulic system that generates linear motion or force through the pressure of the liquid. The cylinder is usually used in conjunction with the gas-liquid supercharger.

TR two-shaft cylinder installation and use1. When the load changes during the work, the cylinder with sufficient output force should be selected.2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected.3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take appropriate protective measures.4. Before the cylinder is connected to the pipeline, the stolen goods in the pipeline must be removed to prevent debris from entering the cylinder.5.

1. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position loading;2. It has certain anti-flexural and torsional properties, and can withstand certain lateral loads;3. In addition to the axial direction, the rest of the body has installation holes, providing customers with a variety of installation and fixing methods;4. There are two groups of inlet and exhaust ports on both sides of the cylinder for actual needs.5. The anti-collision pad at the front end of the body can adjust the cylinder stroke and alleviate the impact;6.

1. A variety of installation forms on the back cover make the installation more convenient;2. The selection of high-temperature seal material can ensure the normal operation of the cylinder under the condition of 150°C;3. The medium used in the cylinder should be filtered by the filter element above 40μm before it can be used    4. The cylinder should be tested for no-load operation before use, and the buffer should be adjusted to the minimum before operation and gradually relaxed, so as to avoid excessive impact and damage to the cylinder;5.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

In modern industrial production, the application of automation equipment is more and more extensive, and the cylinder as an important part of it, its performance and stability directly affect the efficiency and quality of the entire production process. Among them, ESC cylinder with its excellent performance and reliable quality, won the majority of users praise.

High wear resistance brake cylinderHigh wear resistance brake cylinder plays a vital role in the railway field, it is one of the key components of the train brake system.

product details1. The waft manipulate valve on the hydraulic brake cylinder can alter the pace of the piston rod. Brake cylinders with built-in bounce valves and brake valves can be provided in accordance to purchaser necessities to understand their leap and end functions.When the oil in the tank reaches a small scale, it is imperative to refill it, please use No. 40 oil and the corresponding pump.2. It is appropriate for events that require the cylinder to cross slowly and evenly.3.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take necessary protective measures;4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected; 3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

Cutting machine positioning cylinder  Product details1, why install the cylinder: Before the cutting machine starts to work, we need to locate the origin of the workpiece to be processed. If there is no positioning cylinder, we need to adjust the positioning of each plate repeatedly to ensure the precision and accuracy of the processing.

Structural design: SC cylinder has a compact design, the cylinder block and the front and back cover are connected by a pillar, which increases the stability and durability of the structure. In addition, its oil storage function can effectively reduce wear during cylinder movement. company profileadvanced equipmentEnterprise honor  Factory application area1.

Three axis adjustable cylinder product details1. The cylinder with a information rod is composed of two information rods parallel to the piston and the cylinder.2.

1. Reliable structure: cylinder and back cover, piston and piston rod with riveted structure, this design makes the cylinder structure compact and reliable. 2. Surface treatment: The inner diameter of the cylinder is rolled and then subjected to hard oxidation treatment, which improves the durability and corrosion resistance of the cylinder. 3.

product detail：TN series twin-shaft cylinder，It is characterized by the use of plastic polyurethane material, which meets the environmental requirements of ROHS. With high elasticity, its small bending radius allows PU tubes to pass through tight Spaces. In addition, the cylinder also has the characteristics of anti-knotting, which has better anti-knotting effect than other plastic pipes. At the same time, it also has excellent plasticity, can withstand repeated expansion and contraction, and anti-wear characteristics, so that it can be used for a long time in a wear-prone environment.1.

Product Details:Ultra-thin cylinder is a thin design of the cylinder, its thickness is thinner than the ordinary cylinder, so in the case of limited space, the use of ultra-thin cylinder has a great advantage. BESTEN's ACQ series and SDA series are ultra-thin cylinder products. The cylinder block and front and back cover are fixed with C-type buckle ring, which is compact and reliable; The inner diameter of the cylinder block is hard oxidized to increase its wear resistance and durability.

1.TN two-shaft cylinder double piston double force, has a certain anti-bending and anti-torsion performance, can withstand a certain side load, is one of the most widely used two-shaft cylinder.2. There are mounting holes on three sides of the two-shaft cylinder fixing plate, which is convenient for multi-position loading.3. When the load changes during the work, the cylinder with sufficient output force should be selected.4. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected.5.

BESTEN manipulator side cylinder product detailsA cylindrical metal component that guides the piston in a straight line through the cylinder. The air in the engine cylinder expands, converting heat energy into mechanical energy; The gas in the compressor cylinder is compressed by the piston, and the pressure increases. The outer casing of a turbine, rotary piston engine, etc., is also commonly referred to as a "cylinder".

product details1.The thin cylinder occupies less space, has light structure, beautiful appearance, and can bear large transverse load.

Cylinder auxiliary LB tripod  product detailsThe pneumatic auxiliary LB tripod is an accessory of the cylinder, which is mainly used to fix the cylinder and prevent it from moving due to force. The tripod is available in various specifications and models, such as LB-32, LB-40, LB-50, LB-63, LB-80, LB-100, LB-125, LB-160, and LB-200.

1. A variety of installation methods: the central shaft cylinder provides a variety of installation methods, which can be used for blocking, feeding, pushing, stamping, clamping and other occasions, which increases its flexibility and application range.2. Simple speed control: the cylinder is good at reciprocating linear motion, especially suitable for parallel transmission of products and workpieces. By adjusting the one-way throttle valve, the cylinder can simply complete the steady speed control, which is a major feature and advantage of the cylinder drive system software.3.

SC series cylinders Product details1. Choose high-temperature sealing materials to ensure that the cylinder works normally under 150°C conditions;2. When the load changes during work, a cylinder with sufficient output force should be selected;3. The dirt should be cleaned before the cylinder is connected to the pipeline, and the medium used should be filtered by a filter element of more than 40μm to prevent debris from entering the cylinder;4.

1. Connection method: The front and rear cover and stainless steel cylinder are riveted roller package structure, which is reliable and stable. 2. Material advantage: The cylinder adopts high-precision stainless steel pipe, which has high strength and good corrosion resistance, suitable for long-term operation in harsh working environment. 3. Size advantage: Compared with ISO6432 standard cylinders of the same bore and stroke, MF series cylinders are smaller in length, suitable for space-constrained applications. 4.

MA Mini Cylinder Product detailsNo lubrication: The use of oil powder untreated copper as the shaft bearing, so that the piston rod does not need to lubricate.Durability: The cylinder body and front and back covers are oxidized by color EP coating, which not only has wear resistance, corrosion resistance and durability, but also shows a small and exquisite appearance.High temperature resistance: the cylinder adopts high temperature sealing material, so that the cylinder can work normally under high temperature conditions of 150 degrees Celsius (customers need to order from the company).MA