BESTEN Pneumatic Air Cylinder-manufacture,factory,supplier from China

BESTEN manipulator side cylinder product detailsA cylindrical metal component that guides the piston in a straight line through the cylinder. The air in the engine cylinder expands, converting heat energy into mechanical energy; The gas in the compressor cylinder is compressed by the piston, and the pressure increases. The outer casing of a turbine, rotary piston engine, etc., is also commonly referred to as a "cylinder".

product detailsVacuum generator is an advanced pneumatic component, its main function is to use positive pressure source to produce negative pressure. The device is relatively simple in structure, small in size and light in weight, easy to install and does not require additional maintenance. It is through the flow of compressed air to form a certain degree of vacuum, compared with the vacuum pump, the vacuum generator has many advantages, including low cost, high efficiency, clean, economic and miniaturization.

BESTEN two-piece oil Water Filter separator Product detailsIn the pneumatic transmission system, the air source processing part refers to the air filter, pressure reducing valve and oil mist, and some solenoid valves and cylinders can be oil-free lubrication (relying on grease to achieve lubrication function), there is no need to use oil mist!

Pneumatic accessory Y-fitting product detailsThe Y-joint is a common pneumatic joint used to connect components such as air pipes and cylinders. This joint is characterized by its double "Y" shape design, which can divide a gas pipe into four branch tubes. Therefore, it is very useful in applications where one input signal needs to be shunt to multiple output devices. BESTEN offers a wide range of pneumatic fittings for a wide range of pneumatic applications, available in a wide range of materials and configurations, easy to install and suitable for project requirements.

Pneumatic accessories PYB series   product detailsThe PYB series of pneumatic accessories is a common pneumatic joint, which is mainly used to realize the shunt or confluence of the air source.

product presentationThe SC cylinder is a standard cylinder produced by BESTEN and is widely recognized for its special bidirectional sealing structure and smooth buffer regulation. It adopts special shape bidirectional sealing structure, and has the characteristics of smooth buffer adjustment and high temperature resistant sealing material.

Pneumatic accessory single ear CA product detailsWhen the load and the axis of the piston rod should be uniformly installed in the earring type and trunnion type cylinder, the swing of the cylinder and the swing of the load should be ensured in a plane otherwise, the light seal will be worn, causing air leakage and reducing the service life of the cylinder; Sometimes, the cylinder may have a striking action, which may cause damage to the human body and the device.

Pneumatic quick insert elbow PL product detailsPneumatic quick insert elbow PL is a common pneumatic joint used for quick connection of gas pipes. This joint is characterized by its design as a right Angle elbow, which allows easy connection of the air pipe to the desired direction.BESTEN offers the APL series and the PL series of gas pipe quick and quick insert bent joints, which conform to the M5 mouth and are available in a variety of models such as APL4-M5, APL6-M5, etc.

1. A variety of installation forms on the back cover make the installation more convenient;2. A variety of specifications of cylinders and accessories are available for customers to choose;3. The selection of high-temperature seal materials can ensure the normal operation of the cylinder under the condition of 150°C;4. When the load changes during the work, the cylinder with sufficient output force should be selected;5.

1, clear thread, simple installation: surface treatment process, good performance, the use of high-strength raw materials is not easy to break2, alloy material, military quality: the selection of high-precision material, hardness is not easy to deformation, long service life3, compact structure, convenient installation: thickened frame base process, more stable, more impact resistanceProduct Parametercylinder bore\SymbolsA ACADAEBDE32142489427.527.546.51240159541053232541650175691063131642063190691213333752080214861283333932510022991138373711025125279119160464613432    

Open and close type gear air claw Product detailsA parallel opening and closing air claw comprises a cylinder block and a claw block for diffusion and polymerization movement relative to the cylinder block at one end of the cylinder block, characterized in that: The parallel opening and closing air claw comprises a piston, one end of the piston is provided with a concave part of the concave table, the bottom of the concave part is provided with a first ring buffer pad, the upper end of the cylinder body is provided with the concave part of the concave table shaped convex part.Open and clo

Accessories One Touch Fittings PC series product detailsPC thread through is a pneumatic joint product from BESTEN. This kind of joint belongs to PC class, has the characteristics of quick insertion and removal, and is widely used in pneumatic system. However, there are many specific models and specifications, such as KQ2H-G series, KQ2S-G series, etc., which each have different connection thread types, such as M type, R type, etc.

Pneumatic accessories PZB series External specification Model\itemφD RLAEC中PKφJJBJCHWeight(gPZB60161/8＂7.539.527.547.512.56.53.28161215.2PZB6021/4＂1030.550.51420.4PZB6033/8＂1132521727PZB80181/8＂7.54630.553.5158.54.39.5191420.9PZB8021/4＂1033561423.8PZB8033/8＂1134.557.51729.9PZB8041/2＂1438.561.52143.5PZB1002101/4＂1052.536.56318214.311221733.5PZB10033/8＂1137.5641736.5PZB10041/2＂1441.5682149.2PZB1203123/8＂1159.5427221234.313262156.5PZB12041/2＂1445752165.4

1. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position loading;2. It has certain anti-flexural and torsional properties, and can withstand certain lateral loads;3. In addition to the axial direction, the rest of the body has installation holes, providing customers with a variety of installation and fixing methods;4. There are two groups of inlet and exhaust ports on both sides of the cylinder for actual needs.5. The anti-collision pad at the front end of the body can adjust the cylinder stroke and alleviate the impact;6.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected; 3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

Woodworking machinery lever cylinder1, the entrance seal can effectively prevent the left and right cavities of the piston from moving each other, improve the sealing2. Hard oxidation: The use of hard oxidation process to improve the wear resistance and corrosion resistance of the cylinderWoodworking machinery lever cylinder external specifications 航运：  Factory:As a leading enterprise in China's pneumatic components production industry: Shandong Bedi Pneumatic Technology Co., Ltd. is achieving a qualitative leap, Shandong Bedi Pneumatic Technology Co., Ltd.

product detailsThe 4A300 series air valve is an advanced pneumatic component available in 5/2-pass and 5/3-pass types. Its characteristic is the sliding column structure, which ensures good sealing performance and fast reaction ability. Dual head air control with memory function, can respond quickly when the demand changes. The inner hole is processed by special technology, which reduces the friction resistance, thus reducing the starting pressure and prolonging the service life of the product. This valve does not require additional oil lubrication, reducing the amount of maintenance work.

Product detailsAR2000 series pressure reducing valve is an important pneumatic equipment, mainly used to adjust and regulate the pressure of the air source. This kind of equipment has the functions of decompression and pressure regulation, and is widely used in various pneumatic equipment and systems. The nozzle diameter is less than 1/2 inch and the pressure rating is 1-2Mpa.

HFK series  Air gripper product details6.  according to the actual using requirements of customers, the initial position of clamping jaw can be customized to meet the different needs under different working conditions.7. Can be mounted from three directions:With mounting holes on the side and tail.8. With positioning hole:THE positioning hole can improve the can improve the precision and the consistency of reperted dismounting and positing.HFK series  Air gripper(parallelstyle——roller bearing) interior structureNOltemMaterialNOIte mMaterial1PinStainless

1. A variety of installation forms on the back cover make the installation more convenient;2. The selection of high-temperature seal material can ensure the normal operation of the cylinder under the condition of 150°C;3. The medium used in the cylinder should be filtered by the filter element above 40μm before it can be used    4. The cylinder should be tested for no-load operation before use, and the buffer should be adjusted to the minimum before operation and gradually relaxed, so as to avoid excessive impact and damage to the cylinder;5.

MHZL series Air gripper(parallel withauide/longerstrokelrollerbearing stye product details1. With positioning hole:The positioning hole can improve the precision and the consistency of  repeated  dismounting and  positioning;2. Multiple kinds of finger type:According to the actualusing requirements of customers, the initialposition of clamping jaw can be customized to meet the different needs under diferent working conditions.

product detailsThe PL series is a series of pneumatic accessories, including gas pipe fittings, quick threaded elbows, quick connecting cylinders, etc. These accessories are quick to install and easy to use, and are suitable for a wide variety of pneumatic equipment and systems. For example, the PL series has L-threaded two-way pipe joint PL802, which is usually used to connect pneumatic hoses, and its design structure can effectively prevent the hose from falling off and ensure the stable flow of gas.

BSC series holding cylinder  product detailsThe BSC series of holding cylinders is a product of the BESTEN brand, which is derived from the combination of standard cylinders and locking devices. A notable feature of this cylinder is that it can be locked to stop at any position in the stroke.

1. Compact structure: the gas-liquid damping cylinder has compact structure and small size, which is suitable for the increasingly miniaturized main machine supporting needs and easy to install.2. Easy maintenance: the filter is designed with semi-automatic water discharge device, which can automatically drain sewage when the host stops gas, and can also be manually drained. The pressure reducing valve is sensitive and stable.3.