All copper pneumatic fittings-manufacture,factory,supplier from China

Aluminum-plastic pipe knowledge (must see before shooting, so as not to shoot wrong)1,4 points: The aluminum plastic pipe of 1216(commonly known as 16) is connected with the aluminum plastic pipe with an inner diameter of 12mm and an outer diameter of 16mm2,6 points: The aluminum plastic pipe of 1620(commonly known as 20) is connected with an aluminum plastic pipe with an inner diameter of 16m and an outer diameter of 20mm3,1 inch: 2025(commonly known as 25) aluminum-plastic pipe fittings are connected with an inner diameter of 20mm and an outer diameter of 25m aluminum-plastic pipe4,1 inch an

Aluminum block for heavy duty sucker fittings Usage method1. Connect the drain valve, drain tube and suction pad respectively.2.

Accessories One Touch Fittings PC series product detailsPC thread through is a pneumatic joint product from BESTEN. This kind of joint belongs to PC class, has the characteristics of quick insertion and removal, and is widely used in pneumatic system. However, there are many specific models and specifications, such as KQ2H-G series, KQ2S-G series, etc., which each have different connection thread types, such as M type, R type, etc.

One-touch fittings—tube-tube tvp-PU series Product detailsThe product has the advantages of high universality of parts, good performance, safety and reliability, variety and specifications, and is widely used in petroleum, chemical industry, power station and other industrial sectors.One-touch fittings—tube-tube tvp-PU series External specification Model/ItemφDφPKAWeight(gPU4491429.51.7PU6612.516.53436PU881518538.55PU10101821438.1PU121221234712

Threaded two way-Accessories——One-Touch Fittings(Stainless steel）Stainless steel thread double pass is a common pipe connection fittings, widely used in various industrial fields.

Pneumatic accessory Y-fitting product detailsThe Y-joint is a common pneumatic joint used to connect components such as air pipes and cylinders. This joint is characterized by its double "Y" shape design, which can divide a gas pipe into four branch tubes. Therefore, it is very useful in applications where one input signal needs to be shunt to multiple output devices. BESTEN offers a wide range of pneumatic fittings for a wide range of pneumatic applications, available in a wide range of materials and configurations, easy to install and suitable for project requirements.

One-touch fittings—tube-tube type-PE series product detailsPE series straight pipe is a common pipe connection fittings, mainly used to transfer the fluid medium in the pipe directly from one pipe to another pipe. BESTEN is one of the leading brands on the market offering PE series straight-through tubes. Such products can be selected according to different specifications and models to meet the needs of various working conditions.

product detailsThe PL series is a series of pneumatic accessories, including gas pipe fittings, quick threaded elbows, quick connecting cylinders, etc. These accessories are quick to install and easy to use, and are suitable for a wide variety of pneumatic equipment and systems. For example, the PL series has L-threaded two-way pipe joint PL802, which is usually used to connect pneumatic hoses, and its design structure can effectively prevent the hose from falling off and ensure the stable flow of gas.

Pneumatic accessories PYB series   product detailsThe PYB series of pneumatic accessories is a common pneumatic joint, which is mainly used to realize the shunt or confluence of the air source.

Pneumatic accessories PZB series External specification Model\itemφD RLAEC中PKφJJBJCHWeight(gPZB60161/8＂7.539.527.547.512.56.53.28161215.2PZB6021/4＂1030.550.51420.4PZB6033/8＂1132521727PZB80181/8＂7.54630.553.5158.54.39.5191420.9PZB8021/4＂1033561423.8PZB8033/8＂1134.557.51729.9PZB8041/2＂1438.561.52143.5PZB1002101/4＂1052.536.56318214.311221733.5PZB10033/8＂1137.5641736.5PZB10041/2＂1441.5682149.2PZB1203123/8＂1159.5427221234.313262156.5PZB12041/2＂1445752165.4

Pneumatic quick insert elbow PL product detailsPneumatic quick insert elbow PL is a common pneumatic joint used for quick connection of gas pipes. This joint is characterized by its design as a right Angle elbow, which allows easy connection of the air pipe to the desired direction.BESTEN offers the APL series and the PL series of gas pipe quick and quick insert bent joints, which conform to the M5 mouth and are available in a variety of models such as APL4-M5, APL6-M5, etc.

Quick twist PL bend Product details1,Simple and smart,kinds of models,soit meets any stringing pipe requirements.2, Even ifinstalled.plastic pipe can rotate at random.3, Release ring adopts ellipse design,so removing for it is m ore convenient.4, All taper pipe threads paints Teflon leakage-proofrubber,so seal property is good.5, AIl PC type directly connects hexagonal socket hole of grading belt,so itis convenientto install in the narrow.Quick twist PL bend   product standard FluidClean compressed air,vacuumMax.working pressure1.32Mpa(13.5kgf/cm²)Pressure rangeNormal

Pneumatic accessory single ear CA product detailsWhen the load and the axis of the piston rod should be uniformly installed in the earring type and trunnion type cylinder, the swing of the cylinder and the swing of the load should be ensured in a plane otherwise, the light seal will be worn, causing air leakage and reducing the service life of the cylinder; Sometimes, the cylinder may have a striking action, which may cause damage to the human body and the device.

1. Magnetic characteristics: This series of cylinders are all attached with magnets, which is convenient to use with magnetic switches and other sensors to achieve better control effects. 2. Product specifications: For example, MA16×200SCA model cylinder, cylinder diameter of 16mm, stroke of 200mm, is a common specification.3. Purchase information: Products can be purchased through this official website, providing detailed product pictures, prices, parameters, specifications and other information for customer reference. 

MA Mini Cylinder Product detailsNo lubrication: The use of oil powder untreated copper as the shaft bearing, so that the piston rod does not need to lubricate.Durability: The cylinder body and front and back covers are oxidized by color EP coating, which not only has wear resistance, corrosion resistance and durability, but also shows a small and exquisite appearance.High temperature resistance: the cylinder adopts high temperature sealing material, so that the cylinder can work normally under high temperature conditions of 150 degrees Celsius (customers need to order from the company).MA

Woodworking machinery lever cylinder1, the entrance seal can effectively prevent the left and right cavities of the piston from moving each other, improve the sealing2. Hard oxidation: The use of hard oxidation process to improve the wear resistance and corrosion resistance of the cylinderWoodworking machinery lever cylinder external specifications 航运：  Factory:As a leading enterprise in China's pneumatic components production industry: Shandong Bedi Pneumatic Technology Co., Ltd. is achieving a qualitative leap, Shandong Bedi Pneumatic Technology Co., Ltd.

product details1. Seiko casting: fine grinding does not rust: These accessories after fine grinding treatment, not only to prevent rust, but also to improve its overall quality and performance.2.

product detailsCylinder fisheye joint is a special cylinder connection attachment, mainly used to connect the cylinder with other equipment or components. This joint is characterized by a fisheye shape at one end, which allows easy docking with the interface of other equipment, while the other end is connected with the cylinder. By using different types of cylinder fisheye joints, fast, reliable and flexible connections between cylinders and other equipment can be achieved.

1.working pressureThe table below shows the minimum operating pressure.  (MPa)缸 筒 内 径     ( m m)61015(16)20253240506380100Magnetic coupling type /CY *0.160.160.160.150.140.12Mechanical joint type /MY——0.20.1(0.15)Below are the maximum operating pressures.Magnetic coupling rodless cylinder: 0.7MPaMechanically engaged rodless cylinder: 0.8MPa※ The minimum operating pressure of the magnetic coupling type is CY3B and CY3R.Below are the maximum operating pressures.Magnetic coupling rodless cylinder: 0.7MPaMechanically engaged rodless cylin

1. Guide material selection: According to different application requirements, you can choose steel ball linear bearings or bronze plain bearings. The former is suitable for applications requiring high precision and high load capacity, while the latter is suitable for operations requiring radial loads, such as braking. 2.

Product detailsAR2000 series pressure reducing valve is an important pneumatic equipment, mainly used to adjust and regulate the pressure of the air source. This kind of equipment has the functions of decompression and pressure regulation, and is widely used in various pneumatic equipment and systems. The nozzle diameter is less than 1/2 inch and the pressure rating is 1-2Mpa.

product detail：BESTEN's HFD series pneumatic fingers are a thin design with a large span and moment load capacity. Its action mode is double action type, through the double piston drive can double output, so as to obtain a larger clamping force.

1. Manufacturer: Shandong Baedi Pneumatic is a professional manufacturer of MAL aluminum alloy mini cylinder, providing a comprehensive selection of aluminum alloy mini cylinder products, as well as fast pre-sales and after-sales service to ensure customer convenience and safety.2. Application range: Due to its miniature size and high performance, MAL series cylinders are suitable for space-constrained applications such as precision equipment, small robotic arms, etc., where precisely controlled pneumatic actions are required. 3.

Edge banding machine conveyor chain block  product details1, the speed is very low noise: the operation speed is uniform, and the mechanical coordination works to improve the efficiency；2, the use of a wide range of purposes: through the special structure, the edge sealing plate and the edge sealing material on both sides of the adhesive uniform, to ensure that the adhesive force is more firm；3, a variety of models: purchase on demand, a variety of models, according to workmanship needs, free to choose with.Shipping: Factory：As a chief in China's pneumatic ele