Air piston cylinder pneumatic-manufacture,factory,supplier from China

Pneumatic accessory single ear CA product detailsWhen the load and the axis of the piston rod should be uniformly installed in the earring type and trunnion type cylinder, the swing of the cylinder and the swing of the load should be ensured in a plane otherwise, the light seal will be worn, causing air leakage and reducing the service life of the cylinder; Sometimes, the cylinder may have a striking action, which may cause damage to the human body and the device.

Open and close type gear air claw Product detailsA parallel opening and closing air claw comprises a cylinder block and a claw block for diffusion and polymerization movement relative to the cylinder block at one end of the cylinder block, characterized in that: The parallel opening and closing air claw comprises a piston, one end of the piston is provided with a concave part of the concave table, the bottom of the concave part is provided with a first ring buffer pad, the upper end of the cylinder body is provided with the concave part of the concave table shaped convex part.Open and clo

Pneumatic accessories PYB series   product detailsThe PYB series of pneumatic accessories is a common pneumatic joint, which is mainly used to realize the shunt or confluence of the air source.

Pneumatic quick insert elbow PL product detailsPneumatic quick insert elbow PL is a common pneumatic joint used for quick connection of gas pipes. This joint is characterized by its design as a right Angle elbow, which allows easy connection of the air pipe to the desired direction.BESTEN offers the APL series and the PL series of gas pipe quick and quick insert bent joints, which conform to the M5 mouth and are available in a variety of models such as APL4-M5, APL6-M5, etc.

Woodworking machinery lever cylinder1, the entrance seal can effectively prevent the left and right cavities of the piston from moving each other, improve the sealing2. Hard oxidation: The use of hard oxidation process to improve the wear resistance and corrosion resistance of the cylinderWoodworking machinery lever cylinder external specifications 航运：  Factory:As a leading enterprise in China's pneumatic components production industry: Shandong Bedi Pneumatic Technology Co., Ltd. is achieving a qualitative leap, Shandong Bedi Pneumatic Technology Co., Ltd.

Pneumatic accessory Y-fitting product detailsThe Y-joint is a common pneumatic joint used to connect components such as air pipes and cylinders. This joint is characterized by its double "Y" shape design, which can divide a gas pipe into four branch tubes. Therefore, it is very useful in applications where one input signal needs to be shunt to multiple output devices. BESTEN offers a wide range of pneumatic fittings for a wide range of pneumatic applications, available in a wide range of materials and configurations, easy to install and suitable for project requirements.

1. The two ends of the cylinder are equipped with adjustable buffer and fixed buffer device, which ensures smooth reversing action without impact and avoids mechanical damage.2.

BESTEN manipulator side cylinder product detailsA cylindrical metal component that guides the piston in a straight line through the cylinder. The air in the engine cylinder expands, converting heat energy into mechanical energy; The gas in the compressor cylinder is compressed by the piston, and the pressure increases. The outer casing of a turbine, rotary piston engine, etc., is also commonly referred to as a "cylinder".

1, clear thread, simple installation: surface treatment process, good performance, the use of high-strength raw materials is not easy to break2, alloy material, military quality: the selection of high-precision material, hardness is not easy to deformation, long service life3, compact structure, convenient installation: thickened frame base process, more stable, more impact resistanceProduct Parametercylinder bore\SymbolsA ACADAEBDE32142489427.527.546.51240159541053232541650175691063131642063190691213333752080214861283333932510022991138373711025125279119160464613432    

Product detailsAR2000 series pressure reducing valve is an important pneumatic equipment, mainly used to adjust and regulate the pressure of the air source. This kind of equipment has the functions of decompression and pressure regulation, and is widely used in various pneumatic equipment and systems. The nozzle diameter is less than 1/2 inch and the pressure rating is 1-2Mpa.

Pneumatic accessories PZB series External specification Model\itemφD RLAEC中PKφJJBJCHWeight(gPZB60161/8＂7.539.527.547.512.56.53.28161215.2PZB6021/4＂1030.550.51420.4PZB6033/8＂1132521727PZB80181/8＂7.54630.553.5158.54.39.5191420.9PZB8021/4＂1033561423.8PZB8033/8＂1134.557.51729.9PZB8041/2＂1438.561.52143.5PZB1002101/4＂1052.536.56318214.311221733.5PZB10033/8＂1137.5641736.5PZB10041/2＂1441.5682149.2PZB1203123/8＂1159.5427221234.313262156.5PZB12041/2＂1445752165.4

product detailsThe 4A300 series air valve is an advanced pneumatic component available in 5/2-pass and 5/3-pass types. Its characteristic is the sliding column structure, which ensures good sealing performance and fast reaction ability. Dual head air control with memory function, can respond quickly when the demand changes. The inner hole is processed by special technology, which reduces the friction resistance, thus reducing the starting pressure and prolonging the service life of the product. This valve does not require additional oil lubrication, reducing the amount of maintenance work.

1.TN two-shaft cylinder double piston double force, has a certain anti-bending and anti-torsion performance, can withstand a certain side load, is one of the most widely used two-shaft cylinder.2. There are mounting holes on three sides of the two-shaft cylinder fixing plate, which is convenient for multi-position loading.3. When the load changes during the work, the cylinder with sufficient output force should be selected.4. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected.5.

product detail：BESTEN's HFD series pneumatic fingers are a thin design with a large span and moment load capacity. Its action mode is double action type, through the double piston drive can double output, so as to obtain a larger clamping force.

HFK series  Air gripper product details6.  according to the actual using requirements of customers, the initial position of clamping jaw can be customized to meet the different needs under different working conditions.7. Can be mounted from three directions:With mounting holes on the side and tail.8. With positioning hole:THE positioning hole can improve the can improve the precision and the consistency of reperted dismounting and positing.HFK series  Air gripper(parallelstyle——roller bearing) interior structureNOltemMaterialNOIte mMaterial1PinStainless

MHZL series Air gripper(parallel withauide/longerstrokelrollerbearing stye product details1. With positioning hole:The positioning hole can improve the precision and the consistency of  repeated  dismounting and  positioning;2. Multiple kinds of finger type:According to the actualusing requirements of customers, the initialposition of clamping jaw can be customized to meet the different needs under diferent working conditions.

1. Application: rodless cylinder is suitable for the need to save space and the sealing performance requirements are not particularly high occasions. When selecting rodless cylinders, factors such as load, stroke, speed and environmental conditions in practical applications need to be considered.2. Load capacity: Rodless cylinders typically have a smaller load capacity because they lack the piston rods in traditional roded cylinders to provide additional support and force transfer.

product detailsVacuum generator is an advanced pneumatic component, its main function is to use positive pressure source to produce negative pressure. The device is relatively simple in structure, small in size and light in weight, easy to install and does not require additional maintenance. It is through the flow of compressed air to form a certain degree of vacuum, compared with the vacuum pump, the vacuum generator has many advantages, including low cost, high efficiency, clean, economic and miniaturization.

Standard cylinder SCLB Series Use and maintenance of locking cylinders1. In the locking state, if the pressure supply of the air port A is carried out under the non-pressurized state of the air port on both sides, there is a big danger that the lock is not lifted, or the lock is suddenly lifted, and the piston rod will fly out.

product detailsThe PL series is a series of pneumatic accessories, including gas pipe fittings, quick threaded elbows, quick connecting cylinders, etc. These accessories are quick to install and easy to use, and are suitable for a wide variety of pneumatic equipment and systems. For example, the PL series has L-threaded two-way pipe joint PL802, which is usually used to connect pneumatic hoses, and its design structure can effectively prevent the hose from falling off and ensure the stable flow of gas.

A cylindrical metal component that guides the piston through linear reciprocating motion in the cylinder. Air expands in the engine cylinders to produce heat.To mechanical energy; The gas is compressed by a piston in the compressor cylinder to increase the pressure. Turbine, rotary piston engineShells, etc., are also commonly referred to as "cylinders". Applications: printing (tension control), semiconductor (spot welding machine, chip grinding), automatic control, robotics, etc.Stainless steel mini standard cylinder construction1.

BESTEN two-piece oil Water Filter separator Product detailsIn the pneumatic transmission system, the air source processing part refers to the air filter, pressure reducing valve and oil mist, and some solenoid valves and cylinders can be oil-free lubrication (relying on grease to achieve lubrication function), there is no need to use oil mist!

Rodless cylinder product detailsRodless cylinders are mainly divided into magnetic coupling rodless cylinders and mechanical rodless cylinders. In a magnetically coupled rodless cylinder, the action of the piston is transmitted to the external slide through the magnetic coupling force, without the need for a piston rod. Because there is no mechanical connection between the piston and the slider, its sealing performance is excellent.

Accessories Silencers BSL seriesWhen compressed air is discharged into the atmosphere through pneumatic components at high speed, it will produce harsh noise. In order to overcome this noise, a muffler is often installed at the exhaust port, and a muffler and throttle valve can also be combined to form a muffler throttlingAccessories Silencers BSL series  inner structure Accessories——Silencers-BSL series  External specification Model/ItemRLCHWeight(gBSLM5M5×0.83.519.582.9BSL011/8＂624126.7BSL021/4＂8301511.6BSL033/8＂938.51922BSL041/2＂10.5462235