Air Cylinder Pneumatic Air Cylinder for SDA-manufacture,factory,supplier from China

Product Details:Ultra-thin cylinder is a thin design of the cylinder, its thickness is thinner than the ordinary cylinder, so in the case of limited space, the use of ultra-thin cylinder has a great advantage. BESTEN's ACQ series and SDA series are ultra-thin cylinder products. The cylinder block and front and back cover are fixed with C-type buckle ring, which is compact and reliable; The inner diameter of the cylinder block is hard oxidized to increase its wear resistance and durability.

Open and close type gear air claw Product detailsA parallel opening and closing air claw comprises a cylinder block and a claw block for diffusion and polymerization movement relative to the cylinder block at one end of the cylinder block, characterized in that: The parallel opening and closing air claw comprises a piston, one end of the piston is provided with a concave part of the concave table, the bottom of the concave part is provided with a first ring buffer pad, the upper end of the cylinder body is provided with the concave part of the concave table shaped convex part.Open and clo

1, clear thread, simple installation: surface treatment process, good performance, the use of high-strength raw materials is not easy to break2, alloy material, military quality: the selection of high-precision material, hardness is not easy to deformation, long service life3, compact structure, convenient installation: thickened frame base process, more stable, more impact resistanceProduct Parametercylinder bore\SymbolsA ACADAEBDE32142489427.527.546.51240159541053232541650175691063131642063190691213333752080214861283333932510022991138373711025125279119160464613432    

1. The two ends of the cylinder are equipped with adjustable buffer and fixed buffer device, which ensures smooth reversing action without impact and avoids mechanical damage.2.

1: Automotive industry applications - Engine test lineTo move the engine from the load bench to the test bench, rodless cylinders must be used for easy maintenance due to limited space, which greatly saves labor and improves efficiency.2: Classic product application - handling on the production lineThe rodless cylinder changes the direction of product movement, which is very labor-saving, high production efficiency, easy installation and low cost.

1. Compact structure: the gas-liquid damping cylinder has compact structure and small size, which is suitable for the increasingly miniaturized main machine supporting needs and easy to install.2. Easy maintenance: the filter is designed with semi-automatic water discharge device, which can automatically drain sewage when the host stops gas, and can also be manually drained. The pressure reducing valve is sensitive and stable.3.

Pneumatic accessory single ear CA product detailsWhen the load and the axis of the piston rod should be uniformly installed in the earring type and trunnion type cylinder, the swing of the cylinder and the swing of the load should be ensured in a plane otherwise, the light seal will be worn, causing air leakage and reducing the service life of the cylinder; Sometimes, the cylinder may have a striking action, which may cause damage to the human body and the device.

1. Application: rodless cylinder is suitable for the need to save space and the sealing performance requirements are not particularly high occasions. When selecting rodless cylinders, factors such as load, stroke, speed and environmental conditions in practical applications need to be considered.2. Load capacity: Rodless cylinders typically have a smaller load capacity because they lack the piston rods in traditional roded cylinders to provide additional support and force transfer.

1. Reliable structure: cylinder and back cover, piston and piston rod with riveted structure, this design makes the cylinder structure compact and reliable. 2. Surface treatment: The inner diameter of the cylinder is rolled and then subjected to hard oxidation treatment, which improves the durability and corrosion resistance of the cylinder. 3.

Pneumatic accessories PYB series   product detailsThe PYB series of pneumatic accessories is a common pneumatic joint, which is mainly used to realize the shunt or confluence of the air source.

Pneumatic quick insert elbow PL product detailsPneumatic quick insert elbow PL is a common pneumatic joint used for quick connection of gas pipes. This joint is characterized by its design as a right Angle elbow, which allows easy connection of the air pipe to the desired direction.BESTEN offers the APL series and the PL series of gas pipe quick and quick insert bent joints, which conform to the M5 mouth and are available in a variety of models such as APL4-M5, APL6-M5, etc.

1, dedicated to hinge drilling cylinder2, with grooves with oil storage function, high efficiency and energy saving, excellent performance3, the use of safety, manufacturers direct sales quality assurance4, fine workmanship, stronger impact, high strength piston rod5, smooth sliding, cylinder body full hard oxidation treatmentSCJ standard cylinder  external reference spec Bore size\ltemA(SCD)A(SCJ)ABACDADBEFA3218718247933227M10X1.2564019118549933428M12X1.2575020719457934229M16X1.586321019757964229M16X1.5880257238.5751075435.5M20X1.510100263244.5751135435.5M20X1.510Remark:1.

1.TN two-shaft cylinder double piston double force, has a certain anti-bending and anti-torsion performance, can withstand a certain side load, is one of the most widely used two-shaft cylinder.2. There are mounting holes on three sides of the two-shaft cylinder fixing plate, which is convenient for multi-position loading.3. When the load changes during the work, the cylinder with sufficient output force should be selected.4. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected.5.

product presentationThe SC cylinder is a standard cylinder produced by BESTEN and is widely recognized for its special bidirectional sealing structure and smooth buffer regulation. It adopts special shape bidirectional sealing structure, and has the characteristics of smooth buffer adjustment and high temperature resistant sealing material.

MHZL series Air gripper(parallel withauide/longerstrokelrollerbearing stye product details1. With positioning hole:The positioning hole can improve the precision and the consistency of  repeated  dismounting and  positioning;2. Multiple kinds of finger type:According to the actualusing requirements of customers, the initialposition of clamping jaw can be customized to meet the different needs under diferent working conditions.

HFK series  Air gripper product details6.  according to the actual using requirements of customers, the initial position of clamping jaw can be customized to meet the different needs under different working conditions.7. Can be mounted from three directions:With mounting holes on the side and tail.8. With positioning hole:THE positioning hole can improve the can improve the precision and the consistency of reperted dismounting and positing.HFK series  Air gripper(parallelstyle——roller bearing) interior structureNOltemMaterialNOIte mMaterial1PinStainless

Pneumatic accessory Y-fitting product detailsThe Y-joint is a common pneumatic joint used to connect components such as air pipes and cylinders. This joint is characterized by its double "Y" shape design, which can divide a gas pipe into four branch tubes. Therefore, it is very useful in applications where one input signal needs to be shunt to multiple output devices. BESTEN offers a wide range of pneumatic fittings for a wide range of pneumatic applications, available in a wide range of materials and configurations, easy to install and suitable for project requirements.

1.the cylinder buffer adjustment is smooth;2.a variety of specifications of the cylinder and cylinder installation accessories for customers to choose to use;3.

1. Guide material selection: According to different application requirements, you can choose steel ball linear bearings or bronze plain bearings. The former is suitable for applications requiring high precision and high load capacity, while the latter is suitable for operations requiring radial loads, such as braking. 2.

Woodworking machinery lever cylinder1, the entrance seal can effectively prevent the left and right cavities of the piston from moving each other, improve the sealing2. Hard oxidation: The use of hard oxidation process to improve the wear resistance and corrosion resistance of the cylinderWoodworking machinery lever cylinder external specifications 航运：  Factory:As a leading enterprise in China's pneumatic components production industry: Shandong Bedi Pneumatic Technology Co., Ltd. is achieving a qualitative leap, Shandong Bedi Pneumatic Technology Co., Ltd.

BESTEN manipulator side cylinder product detailsA cylindrical metal component that guides the piston in a straight line through the cylinder. The air in the engine cylinder expands, converting heat energy into mechanical energy; The gas in the compressor cylinder is compressed by the piston, and the pressure increases. The outer casing of a turbine, rotary piston engine, etc., is also commonly referred to as a "cylinder".

SAI standard cylinde Product details1. Bore size:32,40,50,63,80 100,125,160,20;2. Adjustable air buffer:With adjustable air buffer on the front and back cover;3. Extruded body with switch groove:With switch groove on the two sides of body,  the counterpart sensor switch type is: CMSE\DMSE;4. Four kinds of cylinder joints:I Knuckle、  Y Knuckle、 Floating Joint、 Universal Join；5. Multi-mounting accessories：LB\FA\FB\CA\CB\CR\FTC\TCM1\TCM2\TC.Standard cylinder——SAl Series interior structure   NO.ItemMaterial 1Rod nutCarbon steellStain

TCL Series Tri-rod cylinder product detailsTCL series three-rod cylinder is a three-axis cylinder that implements JIS standards. It is made of two guide rods made of special bearing steel, equipped with linear bearing or bronze bearing guide, and has high torsion resistance and lateral load resistance. This design makes the cylinder suitable for use in situations where push action is required, or where high precision and load capacity are required.In addition, the working medium of the TCL/TCM series cylinder is air, which needs to be filtered by a 40 micron filter.

4A200 series Air valve(5/2 way,5/3 way) product details1.No need to add oil for lubrication.2.Integrate with the manifold to save installation space.4A200 series Air valve(5/2 way,5/3 way)  Inner structureNo.ItemNo.ItemNo.ItemNoItemNo.ItemNo.ItemNoItemNo.ItemNo.Item1Screw3Bottom cover5Body7Spool9Piston11O-ring13Screw15Return Spring17E Clip2Spring4Bottom cover gasket6O-ring8Wear ring10Pilot body12Screw14Spring holder16Spring holder18Side cover 4A200 series Air valve(5/2 way,5/3 way) External specification Model\ItemABCDE4A210-061/8"1/8"1822.704A210-081/8"1/4&q