Actuators-manufacture,factory,supplier from China

1: Automotive industry applications - Engine test lineTo move the engine from the load bench to the test bench, rodless cylinders must be used for easy maintenance due to limited space, which greatly saves labor and improves efficiency.2: Classic product application - handling on the production lineThe rodless cylinder changes the direction of product movement, which is very labor-saving, high production efficiency, easy installation and low cost.

BSLM Series  Accessories Silencers  Product detailsBy damping the air flow or increasing the exhaust area and other methods to reduce the exhaust speed and exhaust power, so as to achieve the purpose of reducing noise, absorption muffler expansion interference muffler: expansion interference absorption muffler, in the exhaust port of the pneumatic system, especially in the exhaust port of the reversing valve installed mufflerBSLM Series- Accessories——Silencers Inlet pressure and outlet flow rate BSLM Series- Accessories——Silencers  External specification Model/lte

BESTEN two-piece oil Water Filter separator Product detailsIn the pneumatic transmission system, the air source processing part refers to the air filter, pressure reducing valve and oil mist, and some solenoid valves and cylinders can be oil-free lubrication (relying on grease to achieve lubrication function), there is no need to use oil mist!

product detailsAC oil-water separation filter It works by using natural filtration and gravity to break down oil and water and treat wastewater into a form that can be safely discharged. This equipment is widely used in a wide range of industries, such as mining, construction, food processing, as well as specific environmental areas such as catering oil and water separation and industrial oil and water separation.In terms of its specific working process, for example, condensate water enters the oil-water separator through the inlet connection.

Threaded two way-Accessories——One-Touch Fittings(Stainless steel）Stainless steel thread double pass is a common pipe connection fittings, widely used in various industrial fields.

1.TN two-shaft cylinder double piston double force, has a certain anti-bending and anti-torsion performance, can withstand a certain side load, is one of the most widely used two-shaft cylinder.2. There are mounting holes on three sides of the two-shaft cylinder fixing plate, which is convenient for multi-position loading.3. When the load changes during the work, the cylinder with sufficient output force should be selected.4. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected.5.

CXSM series Twin-rod cylinder product detailsThe CXSM two-shaft cylinder is compact and flexible in design, and the cylinder diameter is available in a variety of specifications, so it can meet the needs of different applications. In addition, it features high non-rotating accuracy, dual port position, standard magnetic induction and buffer buffering. The thread of CXSM two-axis cylinder is washed, smooth and smooth, and the inner hole is processed by special processing technology. The friction resistance is low, and the starting pressure is low, which can extend the service life.

HLS Series slide table cylinder product details1. With magnetic switch slots:There are magnetic switch slots side of the cylinder body convenient to installinducting switch.2. Two models (HLS/HLSL)are available3. Six bore size are available:Bore size:6,8,12,16,20,25HLS Series slide table cylinder (cross roll type) interior structure  ItemMaterialItemMaterial1Floating jointCarbon stee13Magnet holderBrass2BumperTPU14Magnet washerNBR3ScrewCarbon steel15MagnetSintered metal(Neodymium-iron-boron)4ScrewCarbon steel5Fixing plateAluminum alloy16Piston sealN

1. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position loading;2. It has certain anti-flexural and torsional properties, and can withstand certain lateral loads;3. In addition to the axial direction, the rest of the body has installation holes, providing customers with a variety of installation and fixing methods;4. There are two groups of inlet and exhaust ports on both sides of the cylinder for actual needs.5. The anti-collision pad at the front end of the body can adjust the cylinder stroke and alleviate the impact;6.

product detailsThe PL series is a series of pneumatic accessories, including gas pipe fittings, quick threaded elbows, quick connecting cylinders, etc. These accessories are quick to install and easy to use, and are suitable for a wide variety of pneumatic equipment and systems. For example, the PL series has L-threaded two-way pipe joint PL802, which is usually used to connect pneumatic hoses, and its design structure can effectively prevent the hose from falling off and ensure the stable flow of gas.

Preparation unit——GL Series product detailsBSTEN's GL series High efficiency compressed air filters contain four filter grades, the Deep Filtration Grade (VL), for the reliable removal of 3μm solid particles, showing 99.95% filtration performance. Its innovative filter element design provides optimal flow characteristics at minimum pressure drop.

1. By extending the multi-stage piston sequentially, it can achieve a long stroke in a relatively short installation length, which is suitable for equipment with limited space but long stroke.2. The compression area of the piston at all levels is different, the output force is larger when the initial extension is large, and the output force gradually decreases with the increase of the number of stages, but it can provide greater thrust than the single-stage cylinder in general.3.

Accessories Speed controllers(Stainless steel)PA series1.Anti-drop structure is designed on the regulating rod,2.The sealant being coated on threaded portion can ensure no leakage of thethreaded connection part.3.The inserting direction of universal speed controller can be adjusted in 360° Accessories  Speed controllers(Stainless steel)PA series interior structure NO.NameMaterialNO.NameMaterialNO.NameMaterial1Adjusting capAluminum alloy7HolderPBT13O-ringNBR2Lockinc capAluminum alloy8O-ringNBR14Locating seatPOM3Throttling columnSUS3049Throttling sleeveAluminum alloy15Spring gaske

Accessories——Speed controllers(Stainless steel)SL series 1.The sealant being coated on threaded portion can ensure no leakage of thethreaded connection part.2.The inserting direction of universal speed controller can be adjusted in 360°Accessories——Speed controllers(Stainless steel)SL series  External specification  Modelltem[Note1]φDRφPAφPBLCKEAEBHWeight(g)maxminSL4M5□4M5×0.89103.53027.514199.586SL401□1/8＂9147.541.5351420.5151115.5SL6M5□6M5x0.812.5103.53027.516.523.511.587.5SL601□1/8＂12.5147.541.53516.52315.51116.5SL602□1/4＂12.5181047.54116.525181430SL603□3/8＂12.522.51152.

Accessories Silencers PAL series Product detailsAn aluminum foam muffler comprises an outer cylinder, an intake pipe with exhaust holes, an exhaust pipe and a front and rear end cover. An aluminum foam disk with a through hole is arranged parallel between the outer cylinder, the intake pipe and the rear end cover to separate the space into a plurality of chambers. Each aluminum foam disk is provided with a round large hole and its periphery is closely connected with the inner wall of the outer cylinder.

product details1. The flow control valve on the hydraulic brake cylinder can adjust the speed of the piston rod. Brake cylinders with built-in jump valves and brake valves can be supplied according to customer requirements to realize their jump and stop functions.When the oil in the tank reaches a small scale, it is necessary to replenish it, please use No. 40 oil and the corresponding pump.2. It is suitable for occasions that require the cylinder to move slowly and evenly.3.

BSC series holding cylinder  product detailsThe BSC series of holding cylinders is a product of the BESTEN brand, which is derived from the combination of standard cylinders and locking devices. A notable feature of this cylinder is that it can be locked to stop at any position in the stroke.

MG series mini cylinder product details1.Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.2.The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.3.There are cylinders and mounting accessories with several specifications for your choice.MG series mini cylinder interior structure NO.ItemMaterial1Rod nutCarbon steel2Front cover packingNBR3BushingWear resistant material4BumperTPU5Piston sealNBR6Wear ringWear resistant material7MagnetRubber8Ba

1. High-strength material: The cylinder is made of high-precision stainless steel pipe, which is not only of high strength, but also has good corrosion resistance, suitable for use under various environmental conditions.2. Standardized products: MA series mini cylinders provide a variety of specifications, including different cylinder diameters and stroke lengths, as well as the corresponding installation accessories, so that customers can choose the right products according to their specific needs.3.

1. Magnetic characteristics: This series of cylinders are all attached with magnets, which is convenient to use with magnetic switches and other sensors to achieve better control effects. 2. Product specifications: For example, MA16×200SCA model cylinder, cylinder diameter of 16mm, stroke of 200mm, is a common specification.3. Purchase information: Products can be purchased through this official website, providing detailed product pictures, prices, parameters, specifications and other information for customer reference. 

Fisheye joint product details1, exquisite technology, a variety of specifications optional: reliable quality, advanced technology, to provide a variety of specifications for choice.2, through the ISO international system three certification, to ensure product quality and reliability.3, the factory has advanced robot automatic production line, precision processing, improve production efficiency and product quality.Fisheye joint Product Parameterproduct brandBESTENproduct materialSuperior bearing steelproduct nameSelf-lubricating fisheye bearingsproduct featureThe alloy wear-resistant layer

Aluminum-plastic pipe knowledge (must see before shooting, so as not to shoot wrong)1,4 points: The aluminum plastic pipe of 1216(commonly known as 16) is connected with the aluminum plastic pipe with an inner diameter of 12mm and an outer diameter of 16mm2,6 points: The aluminum plastic pipe of 1620(commonly known as 20) is connected with an aluminum plastic pipe with an inner diameter of 16m and an outer diameter of 20mm3,1 inch: 2025(commonly known as 25) aluminum-plastic pipe fittings are connected with an inner diameter of 20mm and an outer diameter of 25m aluminum-plastic pipe4,1 inch an

Magnetic coupled rodless cylinderRMS series rodless cylinders are magnetically coupled rodless cylinders. The cylinder is unique in that there is no mechanical connection between the piston and the slider, which makes its sealing performance excellent. In addition, the action of the piston is transmitted to the external slide by magnetic coupling force, without the need for a piston rod.

One-touch fittings—tube-tube tvp-PU series Product detailsThe product has the advantages of high universality of parts, good performance, safety and reliability, variety and specifications, and is widely used in petroleum, chemical industry, power station and other industrial sectors.One-touch fittings—tube-tube tvp-PU series External specification Model/ItemφDφPKAWeight(gPU4491429.51.7PU6612.516.53436PU881518538.55PU10101821438.1PU121221234712