AC oil-water separation filter-manufacture,factory,supplier from China

product detailsAC oil-water separation filter It works by using natural filtration and gravity to break down oil and water and treat wastewater into a form that can be safely discharged. This equipment is widely used in a wide range of industries, such as mining, construction, food processing, as well as specific environmental areas such as catering oil and water separation and industrial oil and water separation.In terms of its specific working process, for example, condensate water enters the oil-water separator through the inlet connection.

BFR Two-piece oil-water separator Product Parameter1. Maximum operating pressure: 1.0Mpa(145Psi)2.Guarantee pressure resistance: 1.5Mpa(215Psi)3. Filter cup capacity: 60cc4.

BESTEN two-piece oil Water Filter separator Product detailsIn the pneumatic transmission system, the air source processing part refers to the air filter, pressure reducing valve and oil mist, and some solenoid valves and cylinders can be oil-free lubrication (relying on grease to achieve lubrication function), there is no need to use oil mist!

AF Series Filter  Preparation unit product detailsAF series filter preparation device features: improved workability, filter element and cup cover integration, easy to replace filter element; Reduced maintenance space by up to 46%; Improved visibility and safety with a transparent, fully enclosed cup protective cover.AF Series Filter  Preparation unit interior structure No.ItemMaterial1Drain bowlPC2Umbrella bafflePOM3Filtet coreHDPE4O-ringNBR5Air guiderPOM6BodyAluminun alloy7PistonPOM8SpringStainless steel9Fixed baff|ePOM10Fixing nutPOM11Drain cockPOM AF Series Fi

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

Product imagesInstall and use1. When the load changes during work, a cylinder with sufficient output force should be selected; 2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected; 3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures 4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder; 5.

Explosion-proof PU gas pipe product detailsIts oil resistance is better, it is about fifteen to twenty times the oil resistance of natural rubber. Another is that its wear resistance is relatively good, it is more than thirty to fifty times the abrasive property of natural rubber, so we can not underestimate it. In addition, its aging resistance is also relatively good, it is about five times the aging performance of natural rubber, which is not available to other materials.

1. Compact structure: the gas-liquid damping cylinder has compact structure and small size, which is suitable for the increasingly miniaturized main machine supporting needs and easy to install.2. Easy maintenance: the filter is designed with semi-automatic water discharge device, which can automatically drain sewage when the host stops gas, and can also be manually drained. The pressure reducing valve is sensitive and stable.3.

TR two-shaft cylinder installation and use1. When the load changes during the work, the cylinder with sufficient output force should be selected.2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected.3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take appropriate protective measures.4. Before the cylinder is connected to the pipeline, the stolen goods in the pipeline must be removed to prevent debris from entering the cylinder.5.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take necessary protective measures;4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected; 3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

Preparation unit——GL Series product detailsBSTEN's GL series High efficiency compressed air filters contain four filter grades, the Deep Filtration Grade (VL), for the reliable removal of 3μm solid particles, showing 99.95% filtration performance. Its innovative filter element design provides optimal flow characteristics at minimum pressure drop.

PC thread through Product details1, widely used: products are widely used in machinery and equipment, textile equipment, medical equipment, food processing and other fields2, the quick joint is not suitable for what kind of environment: do not use for electrostatic sensitive occasions, will cause poor system failure, do not use for spark occasions, will cause fire hazards, do not use in cutting oil, lubricating oil and cooling liquid direct contact environmentPC thread through Product ParameternameThreaded straight jointmodelPCMaximum pressure resistance1.5Mpathe pressure range of use1～1.

1. Gas-liquid converters can be used to obtain higher pressure and strength where greater output is required. 2. An oil cylinder, also known as a hydraulic cylinder or hydraulic cylinder, is an executive element in a hydraulic system that generates linear motion or force through the pressure of the liquid. The cylinder is usually used in conjunction with the gas-liquid supercharger.

Product details: 1.304 stainless steel thread, provide a variety of installation methods 2. Limit switch card slot, control cylinder back to the origin 3. Oil injection hole: add well before leaving the factory, simple maintenance4.

product details1. The waft manipulate valve on the hydraulic brake cylinder can alter the pace of the piston rod. Brake cylinders with built-in bounce valves and brake valves can be provided in accordance to purchaser necessities to understand their leap and end functions.When the oil in the tank reaches a small scale, it is imperative to refill it, please use No. 40 oil and the corresponding pump.2. It is appropriate for events that require the cylinder to cross slowly and evenly.3.

product details1. The flow control valve on the hydraulic brake cylinder can adjust the speed of the piston rod. Brake cylinders with built-in jump valves and brake valves can be supplied according to customer requirements to realize their jump and stop functions.When the oil in the tank reaches a small scale, it is necessary to replenish it, please use No. 40 oil and the corresponding pump.2. It is suitable for occasions that require the cylinder to move slowly and evenly.3.

Asphalt spreader cylinder assembly product detailsAsphalt spreader, also known as asphalt spreader, is a kind of pavement construction machinery, mainly used for spraying hot asphalt, emulsified asphalt, residual oil and other liquid asphalt. It not only has the ability to transport liquid asphalt, but also can be operated while driving, and is widely used in asphalt pavement of asphalt bottom, bonding layer and waterproof layer.

SC sequence cylinders Product details1. Choose high-temperature sealing substances to make certain that the cylinder works commonly underneath 150°C conditions;2. When the load adjustments at some point of work, a cylinder with adequate output pressure ought to be selected;3. The grime need to be cleaned earlier than the cylinder is linked to the pipeline, and the medium used need to be filtered by using a filter aspect of greater than 40μm to stop particles from coming into the cylinder;4.

 3R/4R Manual Valve 1. When installing, pay attention to whether the gas flow direction and the nozzle tooth shape are correct, and the use of media needs to be filtered through a 40μm filter element;2. The gas flow direction P is the intake air, A, (B) is the working port, and R and (S) are the exhaust port;3.

1, dedicated to hinge drilling cylinder2, with grooves with oil storage function, high efficiency and energy saving, excellent performance3, the use of safety, manufacturers direct sales quality assurance4, fine workmanship, stronger impact, high strength piston rod5, smooth sliding, cylinder body full hard oxidation treatmentSCJ standard cylinder  external reference spec Bore size\ltemA(SCD)A(SCJ)ABACDADBEFA3218718247933227M10X1.2564019118549933428M12X1.2575020719457934229M16X1.586321019757964229M16X1.5880257238.5751075435.5M20X1.510100263244.5751135435.5M20X1.510Remark:1.

SC series cylinders Product details1. Choose high-temperature sealing materials to ensure that the cylinder works normally under 150°C conditions;2. When the load changes during work, a cylinder with sufficient output force should be selected;3. The dirt should be cleaned before the cylinder is connected to the pipeline, and the medium used should be filtered by a filter element of more than 40μm to prevent debris from entering the cylinder;4.

1. A variety of installation forms on the back cover make the installation more convenient;2. The selection of high-temperature seal material can ensure the normal operation of the cylinder under the condition of 150°C;3. The medium used in the cylinder should be filtered by the filter element above 40μm before it can be used    4. The cylinder should be tested for no-load operation before use, and the buffer should be adjusted to the minimum before operation and gradually relaxed, so as to avoid excessive impact and damage to the cylinder;5.