4HV series Hand lever valve(4/2 way, 4/3 way)-manufacture,factory,supplier from China

4HV series Hand lever valve(4/2 way, 4/3 way)  product details1. Large flow rate and small pressure loss;2. A variety of installation structure, easy installation;3. A variety of models are available;4. Pay attention to the direction of gas flow and whether the tooth shape is correct during installation, and the medium used needs to be filtered through a 40μm filter element;5. The gas flow direction P is the intake air, A, (B) is the working port, and R and (S) are the exhaust port;6.

4A200 series Air valve(5/2 way,5/3 way) product details1.No need to add oil for lubrication.2.Integrate with the manifold to save installation space.4A200 series Air valve(5/2 way,5/3 way)  Inner structureNo.ItemNo.ItemNo.ItemNoItemNo.ItemNo.ItemNoItemNo.ItemNo.Item1Screw3Bottom cover5Body7Spool9Piston11O-ring13Screw15Return Spring17E Clip2Spring4Bottom cover gasket6O-ring8Wear ring10Pilot body12Screw14Spring holder16Spring holder18Side cover 4A200 series Air valve(5/2 way,5/3 way) External specification Model\ItemABCDE4A210-061/8"1/8"1822.704A210-081/8"1/4&q

Product details3A100 series air control valve, also known as three-way two-position air control valve, adopts sliding column structure to ensure good sealing performance and sensitive response. The dual-head gas-controlled portion of the valve has a memory function, that is, it can remain in its original state after a power failure or loss of air pressure. The inner hole is processed by special technology, with low friction resistance, low starting pressure and long service life. In addition, no lubrication is required and maintenance is easy.

product detailsThe 4A300 series air valve is an advanced pneumatic component available in 5/2-pass and 5/3-pass types. Its characteristic is the sliding column structure, which ensures good sealing performance and fast reaction ability. Dual head air control with memory function, can respond quickly when the demand changes. The inner hole is processed by special technology, which reduces the friction resistance, thus reducing the starting pressure and prolonging the service life of the product. This valve does not require additional oil lubrication, reducing the amount of maintenance work.

4M series Solenoid valve(5/2 way) product details1. Equipped with manual device, easy to install and debug;2. A variety of standard voltage levels are available;3. When installing, pay attention to whether the gas flow direction and the nozzle tooth shape are correct, and the use of media needs to be filtered through a 40μm filter element;4. The gas flow direction P is the intake air, A, (B) is the working port, and R and (S) are the exhaust port;5.

Threaded two way-Accessories——One-Touch Fittings(Stainless steel）Stainless steel thread double pass is a common pipe connection fittings, widely used in various industrial fields.

Woodworking machinery lever cylinder1, the entrance seal can effectively prevent the left and right cavities of the piston from moving each other, improve the sealing2. Hard oxidation: The use of hard oxidation process to improve the wear resistance and corrosion resistance of the cylinderWoodworking machinery lever cylinder external specifications 航运：  Factory:As a leading enterprise in China's pneumatic components production industry: Shandong Bedi Pneumatic Technology Co., Ltd. is achieving a qualitative leap, Shandong Bedi Pneumatic Technology Co., Ltd.

product details3R series push-pull valve is a hand-pulled valve, with manual operation, direction and shaft core coaxial characteristics, easy to operate and accurate and reliable positioning. This kind of valve adopts the sliding column structure, good sealing, small size, light weight, very convenient installation and disassembly. The inner hole is processed by special technology, which reduces the friction resistance and prolongs the service life of the product. In addition, it does not require oil lubrication and can be installed in multiple positions.

4V400 series solenoid valve product details1.No need to add oil for lubrication.2.It is available to form integrated valve group with the base to save installation space.3.Afiliated manual devices are equipped to facilitate installation and debugging.4.Several standard voltage grades are optional.4V400 series solenoid valve interior structureNo.ItemNo.ItemNo.temNo.ItemNo.|temNo.|temNo.ItemNo.ItemNo   temNo.ItemNo.  Item1Connector3Coil5Fixedplate7Pilot kit9Wearring11Fixedscrew13Bottom  covergasket15Spool17Overridespring19Springnolder21  Side &nb

Pneumatic accessories PZB series External specification Model\itemφD RLAEC中PKφJJBJCHWeight(gPZB60161/8＂7.539.527.547.512.56.53.28161215.2PZB6021/4＂1030.550.51420.4PZB6033/8＂1132521727PZB80181/8＂7.54630.553.5158.54.39.5191420.9PZB8021/4＂1033561423.8PZB8033/8＂1134.557.51729.9PZB8041/2＂1438.561.52143.5PZB1002101/4＂1052.536.56318214.311221733.5PZB10033/8＂1137.5641736.5PZB10041/2＂1441.5682149.2PZB1203123/8＂1159.5427221234.313262156.5PZB12041/2＂1445752165.4

Characteristics of SU Standard Cylinder1. SU series standard cylinder is the market standard cylinder;2. The seal adopts special-shaped two-way sealing structure, compact size, and self-lubricating function of oil removal;3. It is a meter-shaped cylinder barrel with a built-in tie rod cylinder, and the front and rear covers and cylinder barrels are connected with tie rod pillars, which is stable and reliable;4. When the load changes during work, a cylinder with sufficient output force should be selected;5.

Preparation unit——GFR Series  Installation and use1, before use, pay attention to check whether the components are damaged during transportation, and then install and use;2, please pay attention to the gas flow direction (pay attention to "→" direction) and nozzle tooth type is correct;3, please pay attention to whether the installation conditions meet the technical requirements (such as "working pressure", "use temperature range");4, please pay attention to the use of media or installation environment, try to avoid fluorine, carbon compounds, aromatic compou

Accessories——Speed controllers(Stainless steel)SL series 1.The sealant being coated on threaded portion can ensure no leakage of thethreaded connection part.2.The inserting direction of universal speed controller can be adjusted in 360°Accessories——Speed controllers(Stainless steel)SL series  External specification  Modelltem[Note1]φDRφPAφPBLCKEAEBHWeight(g)maxminSL4M5□4M5×0.89103.53027.514199.586SL401□1/8＂9147.541.5351420.5151115.5SL6M5□6M5x0.812.5103.53027.516.523.511.587.5SL601□1/8＂12.5147.541.53516.52315.51116.5SL602□1/4＂12.5181047.54116.525181430SL603□3/8＂12.522.51152.

 3H/4H Manual Valve interior structure1. Manual operation, clean operation, correct and dependable positioning;2. Sliding column structure, suitable sealing and touchy response;3. The internal gap adopts distinct processing technology, which has low friction resistance, low beginning air stress and long carrier life;4. Panel set up function, effortless installation;5. A range of fashions are available;6.

1. A variety of installation methods: the central shaft cylinder provides a variety of installation methods, which can be used for blocking, feeding, pushing, stamping, clamping and other occasions, which increases its flexibility and application range.2. Simple speed control: the cylinder is good at reciprocating linear motion, especially suitable for parallel transmission of products and workpieces. By adjusting the one-way throttle valve, the cylinder can simply complete the steady speed control, which is a major feature and advantage of the cylinder drive system software.3.

3V200 series solenoid valve product details1.Afiliated manual devices are equipped to facilitate installation and debugging.2.Several standard voltage grades are optional.3.Integrate with the manifold to save installation space.3V200 series solenoid valve interior structureNo.ItemNo.ItemNo.Item1Fixed plate8O-ring15Piston2Manual override9Body16Pilot screw3Override spring10Spool spring17O-ring4Piston O-ring11Bottom covergasket18Armature5Pilot body12Bottom cover19Coil6Spool packing13Screw20Coil nut7Spool14Wear ring21Connector3V200 series solenoid valve external characteristic ltem\Model

Accessories Silencers BSL seriesWhen compressed air is discharged into the atmosphere through pneumatic components at high speed, it will produce harsh noise. In order to overcome this noise, a muffler is often installed at the exhaust port, and a muffler and throttle valve can also be combined to form a muffler throttlingAccessories Silencers BSL series  inner structure Accessories——Silencers-BSL series  External specification Model/ItemRLCHWeight(gBSLM5M5×0.83.519.582.9BSL011/8＂624126.7BSL021/4＂8301511.6BSL033/8＂938.51922BSL041/2＂10.5462235

product details1.Afiliated manual devices are equipped to facilitate installation and debugging.2.Several standard voltage grades are optional.3.Integrate with the manifold to save installation space.3V100 series solenoid valve interior structure No.ItemNoItemNo.Item1Fixed plate8O-ring15Piston2Manual override9Body16Pilol screw3Override spring10Spool spring17O-ring4Piston O-ring11Bottom  covergasket18Armature5Pilot body12Bottom cover19Coil6Spool packing13Screw20Coil nut7Spool14Wear ring21Connector3V100 series solenoid valve external characteristic  

Product imagesInstall and use1. When the load changes during work, a cylinder with sufficient output force should be selected; 2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected; 3. In the case of high humidity, dust, or water droplets, oil dust, and welding slag, the cylinder should take necessary protective measures 4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder; 5.

product details1. The inner hole adopts special processing technology, which has low friction resistance, low starting air pressure and long service life;2. Equipped with manual device, easy to install and debug;3. The valve body and valve seat can be used in multiple valves to save space;4. A variety of standard voltage levels are available;5. When installing, pay attention to whether the gas flow direction and the nozzle tooth shape are correct, and the use of media needs to be filtered through a 40μm filter element;6.

1. When the load changes during work, a cylinder with sufficient output force should be selected;2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosion resistant cylinder should be selected;3. In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take necessary protective measures;4. Before the cylinder is connected to the pipeline, the internal organs of the pipeline must be removed to prevent the debris from entering the cylinder;5.

1. Mechanical equipment: food machinery, medical machinery, welding machinery, packaging equipment and other fields. 2. Entertainment industry: dynamic seats, multi-freedom dynamic platform, simulation and other fields. 3. Automotive industry: press machine, fatigue test and other fields. 4.

1. There are mounting holes on three sides of the fixing plate, which is easy to load in multiple positions.2. It has certain resistance to bending and torsion, and can withstand certain lateral load.3. In addition to the axis of the body, the other faces are equipped with mounting holes, providing customers with a variety of installation and fixing methods.4. There are two groups of inlet on both sides of the cylinder, and the exhaust port is selected for actual needs. 

1. A variety of installation forms on the back cover make the installation more convenient;2. A variety of specifications of cylinders and accessories are available for customers to choose;3. The selection of high-temperature seal materials can ensure the normal operation of the cylinder under the condition of 150°C;4. When the load changes during the work, the cylinder with sufficient output force should be selected;5.